Nuage Networks SD-WAN Solution Guide
Focus
Focus
Prisma Access

Nuage Networks SD-WAN Solution Guide

Table of Contents

Nuage Networks SD-WAN Solution Guide

Where Can I Use This?
What Do I Need?
  • Prisma Access (Cloud Management)
  • Prisma Access (Panorama Managed)
Nuage Networks Virtualized Network Services (VNS) is an SD-WAN 2.0 solution that automates the provisioning, configuration, and management of WAN connections to provide the optimal application performance at the lowest cost, while meeting strict business policy and security requirements for each application. Nuage Networks VNS can provide this policy-based automation while seamlessly connecting WAN branch sites to on-premises data centers and private clouds, public clouds, and provider-managed VPN networks. VNS relies on a central policy repository to define business and application specific rules that dynamically optimize WAN links and remote branch appliances or devices.
To secure your organization’s access to resources outside the SD-WAN and to the internet, you can deploy a Nuage Networks SD-WAN with Prisma Access, a cloud-based security infrastructure that uses next-generation security features. Using a shared ownership model, Palo Alto Networks manages the Prisma Access infrastructure, while you manage the process of connecting the Nuage Networks SD-WAN to Prisma Access.

Supported Software Versions and Requirements

Nuage Networks have three types of NSGs:
  • NSG-C Series
  • NSG-E Series
  • NSG-X Series
All of the listed NSGs work with Prisma Access. The only differences are the resources that they have and the access and WAN interfaces that they support. For more information, refer to the NSG series product information at http://www.nuagenetworks.net/resources/product-information/. The NSG series consists of NSG-C (small), NSG-E (medium), and NSG-X (large).

Supported IKE and IPSec Cryptographic Profiles

You onboard your SD-WAN edge devices using a remote network connection between the edge device at the branch site, HQ, or hub to Prisma Access. Use Prisma Access to create a remote network connection and create IKE and IPSec Crypto profiles; then, set up an IPSec tunnel between the SD-WAN edge device and Prisma Access.
The following table documents the IKE/IPSec crypto settings that are supported with Prisma Access and the Nuage Networks SD-WAN. In addition, the supported architecture types are listed at the end of the table. A check mark indicates that the profile or architecture type is supported; a dash (—) indicates that it's not supported. Default and Recommended settings are noted in the table.
Crypto Profiles
Prisma Access
Nuage Networks
Tunnel Type
IPSec Tunnel
GRE Tunnel
Routing
Static Routes
Dynamic Routing (BGP)
Dynamic Routing (OSPF)
IKE Versions
IKE v1
IKE v2
IPSec Phase 1 DH-Group
Group 1
Group 2
(Default)
(Default)
Group 5
Group 14
Group 19
Group 20
(Recommended)
IPSec Phase 1 Auth
If you use IKEv2 with certificate-based authentication, only SHA1 is supported in IKE Crypto profiles (Phase 1).
MD5
SHA1
(Default)
(Default)
SHA256
SHA384
SHA512
(Recommended)
IPSec Phase 1 Encryption
DES
3DES
(Default)
AES-128-CBC
(Default)
(Default)
AES-192-CBC
AES-256-CBC
(Recommended)
IPSec Phase 1 Key Lifetime Default
(8 Hours)
(1 Day)
IPSec Phase 1 Peer Authentication
Pre-Shared Key
Certificate
IKE Peer Identification
FQDN
IP Address
User FQDN
IKE Peer
As Static Peer
As Dynamic Peer
Options
NAT Traversal
Passive Mode
Ability to Negotiate Tunnel
Per Subnet Pair
Per Pair of Hosts
Per Gateway Pair
IPSec Phase 2 DH-Group
There is no separate option on the Nuage Networks side for a Phase 2 DH-Group; however, if you enable PFS, the network can process Phase 2 DH-Group keys.
Group 1
Group 2
(Default)
(Default)
Group 5
Group 14
Group 19
Group 20
(Recommended)
No PFS
IPSec Phase 2 Auth
MD5
SHA1
(Default)
(Default)
SHA256
SHA384
SHA512
(Recommended)
None
IPSec Phase 2 Encryption
DES
3DES
(Default)
AES-128-CBC
(Default)
AES-192-CBC
AES-256-CBC
AES-128-CCM
AES-128-GCM
AES-256-GCM
(Recommended)
NULL
IPSec Protocol
ESP
AH
IPSec Phase 2 Key Lifetime Default
(1 Hour)
(1 Hour)
Tunnel Monitoring Fallback
Dead Peer Detection (DPD)
ICMP
Bidirectional Forwarding Detection (BFD)
SD-WAN Architecture Type
With Regional Hub/Gateway/Data Center
N/A
(Optional)
No Regional Hub/Gateway/Data Center
NA
(Optional)

SD-WAN Deployment Architectures Supported by Nuage Networks

Nuage Networks supports the following deployment architectures for use with Prisma Access. A dash (—) indicates that the deployment isn't supported.
Use Case
Architecture
Supported?
Securing traffic from each branch site with 1 WAN link (Type 1)
Yes
Securing branch and HQ sites with active/backup SD-WAN connections
Yes
Securing branch and HQ sites with active/active SD-WAN connections
Yes
Securing branch and HQ sites with SD-WAN edge devices in HA mode
Yes
Securing SD-WAN deployments with Regional Hub/POP architecture (Type 2)
Yes

Recommended For You