Verify and Troubleshoot the Aruba Remote Network

Use the procedures in this section to verify and troubleshoot the Aruba SD-WAN.

Verify the Aruba Remote Network

To verify the status of the remote network tunnel, perform one or more of the following steps.
  • Check the state of the tunnel from the interface of Aruba Central from the
    gateway monitoring
    page, in the
    tunnels
    section:
  • Check the state of the tunnel from Prisma Access by selecting
    Panorama
    Cloud Services
    Status
    Monitor
    Remote Networks
    .
  • Use CLI from the BGWs, either through SSH or through the remote console provided in Aruba central.
  • You can also use CLI to verify if the user is in the correct role.

Troubleshoot the Aruba Remote Network

Prisma Access provides logs that provide you with the status of remote tunnels and the status of each tunnel. To view these logs in Panorama, select
Monitor
Logs
System
.
To debug tunnel issues, you can filter for tunnel-specific logs by using the object identifier corresponding to that tunnel. The following figures show errors related to tunnel misconfiguration and negotiation issues.

Recommended For You