CLI Commands in Prisma SD-WAN ION Device Release 5.6.1

See the CLI commands introduced in Prisma SD-WAN ION device Release 5.6.1.
See the new and updated device CLI commands in Prisma SD-WAN ION Device Release 5.6.1.
Command
Description
New/Updated
clear routing multicast statistics
Clears the routing multicast statistics to debug and troubleshoot.
New
config cellular modem
Configures modem SIM PIN.
New
debug routing multicast log
Configure to know the routing multicast log module details.
New
debug cellular stats
Configure the cellular stats for the device.
New
dump routing multicast config
Displays the routing multicast specific configurations of a device.
New
dump routing multicast igmp
Displays the routing multicast internet group management protocol (IGMP) specific configurations of a device.
New
dump routing multicast interface
Displays the routing multicast interface specific configurations of a device.
New
dump routing multicast internal vif-entries
Displays the internal vif entries in multicast.
New
dump routing multicast mroute
Displays the routing multicast mroute specific configurations of a device.
New
dump routing multicast pim
Displays the Protocol Independent Multicast (PIM) routing configurations of a device.
New
dump routing multicast sources
Displays the information about multicast source(s).
New
dump routing multicast statistics
Displays the routing multicast statistics of a device.
New
dump routing multicast status
Displays the routing multicast status of a ION device.
New
dump security-policy config policy-set-stack
Displays the security policy set stack configuration for a device.
New
dump cellular config
Displays the cellular configurations.
New
dump cellular stats
Displays the statistics of the modem.
New
dump cellular status
Displays the cellular status of the modem.
New
dump dpdk cpu
Displays the dpdk cpu usage.
New
dump dpdk port status
Displays the dpdk port status.
New
dump dpdk interface
Displays the all interfaces within the dpdk stack.
New
dump dpdk stats
Displays the dpdk stats.
New
inspect dpdk ip-rules
Presents the ip address rules in the dpdk stack.
New
inspect dpdk vrf
Presents the dpdk route table for a specific vrf.
New
inspect routing multicast interface
Presents the forwarding state of the multicast enabled interfaces.
New
inspect routing multicast mroute
Presents the forwarding state of the multicast.
New
inspect security-policy lookup
Presents to identify the potential security policies for an application flow.
New
inspect security-policy size
Presents the size of the security policies for an application flow.
New
dump waninterface config
Displays the WAN circuit configurations.
Updated
dump interface config
Displays the interface configurations.
Updated
dump interface status
Displays the interface status (port or sub interface).
Updated
dump security-policy config policy-set
Displays the security policy sets configuration for a device.
Updated
dump security-policy config zones
Displays the configuration of security policy rules for zones.
Updated
dump security-policy config prefix-filters
Displays the security policy prefix filter configuration.
Updated
dump config security
Displays the security configuration available on a device.
Updated
dump security-policy config policy-rules
Displays the security policy rule configuration for a device.
Updated
dump syslog config
Displays the syslog configuration.
Updated
dump syslog-rtr stats
Displays the current status of the syslog router.
Updated
debug logging facility
Configure to set the log level for a component.
Updated
inspect flow internal
Presents the details of flows that match the input filter.
Updated
inspect flow-detail
Presents the details on active flows and to debug current flows matching the user-specified options.
Updated
inspect flow brief
Presents the brief details for active flows and to debug current flows matching the user-specified options.
Updated
inspect lqm stats
Presents the link quality metrics (LQM).
Updated

Recommended For You