Focus

Prisma SD-WAN

Upgrade the Device Software

Table of Contents

Filter

Expand All | Collapse All

Activation & Onboarding
Administration
CloudBlades
Version
- CloudBlade Integrations
- CloudBlades Integration with Prisma Access
Deployment
Incidents & Alerts
Reference
Release Notes
Version
- 5.6
- 6.1
- 6.2
- 6.3
- 6.4
- 6.5
- New Features Guide
- On-Premises Controller
- Prisma SD-WAN CloudBlades
- Prisma Access CloudBlade Cloud Managed
- Prisma Access CloudBlade Panorama Managed

Learn to upgrade the device software.

Upgrade the device software by following the below mentioned steps:

To download and upgrade device software using the script:

Download the hardware bundle and upgrade the device by executing the following command:

Upgrade net 1 https://buildmaster.build.cloudgenix.com/artifacts/ReleaseBuilds/6.1.1/b10/bundle_hw-6.1.1-b10 Upgrade to 6.2.3-bxx: download_discovery

Obtain the hardware bundle file in the device and then initiate the upgrade:
1. Obtain the hardware bundle file to the location /home/root from a source system by using "root" → scp ubuntu@10.64.10.189:/home/ubuntu/bundle_hw-6.2.3-bxx.
2. Initiate the upgrade using the hardware bundle file by using "elem-admin" → upgrade file home/bundle_hw-6.2.3-bxx.
3. Verify if the device software is upgraded by running the CLI toolkit command dump overview.

Upload the Software Image to the Operator Console

Log in to the Operator console.
From the home page, navigate to Configuration Image Management.
Select Device and click Upload.
After uploading the software inventory successfully, click Create under Actions.
After the Software Inventory is created successfully, click Allocate.

After the software is allocated, the link is disabled.

Upgrade the device software from the Administrator console home page ManageSetupDevicesClaimed Devices.
Click Upgrade in the Software column.
Select the version and upgrade.

Alternatively, you can schedule an upgrade at a later time.

To verify if the device software is upgraded, execute the CLI command dump overview
Verify that the Software version is upgraded in the command output.

You can view the activity on the devices/sites for only up to 30 days. Stats data more than 30 days old and flow data more than 10 days are auto-purged.