: Learn Rendezvous Points (RPs) Dynamically
Focus
Focus

Learn Rendezvous Points (RPs) Dynamically

Table of Contents

Learn Rendezvous Points (RPs) Dynamically

Enable BSM for the ION device to learn RPs dynamically in
Prisma SD-WAN
.
Where Can I Use This?
What Do I Need?
  • Prisma SD-WAN
  • Active
    Prisma SD-WAN
    subscription
Enable BSM for the ION device to learn RPs dynamically. Use this feature for ION devices running software versions 6.0.1 or higher.
  1. Select
    Workflows
    Devices
    Claimed Devices
    Configure the device
    Routing
    Multicast
    Global Configuration
    .
  2. Select
    Enable BSM
    .
    Ensure that the RP and the multicast source are reachable via specific routes (learned via static or dynamic routes) as they cannot be resolved using default routes.
  3. (Optional)
    Select
    Multicast
    RP Configuration
    to check the RP addresses.
    A static RP configured on a branch site takes precedence over a static RP configured at a data center site.
    Field
    Description
    RP Address
    Displays the IP address of the static RP or the dynamically learnt RP.
    Type
    BSR
    —Indicates that the RP is learnt dynamically via BSM.
    Static
    —Indicates that the RP is configured statically.
    Name
    Displays the name given to a static RP. This field will be blank for a dynamically learnt RP.
    Address
    Displays the multicast group IP addresses to which the RP caters.

Recommended For You