Prisma SD-WAN
Edit Switch Configurations
Table of Contents
Edit Switch Configurations
Lets see how to switch or edit the switch configurations for ION 1200-S and ION 3200
devices in Prisma SD-WAN netsec.
| Where Can I Use This? | What Do I Need? |
|---|---|
|
|
Edit the Switch configurations on the Switch tab.
- Select .On the Switch tab, Edit the configurations.
![]()
Update the following Switch information:- Default VLAN ID is 1.
- Enable Spanning Tree is checked by default.
- Select STP Mode as RSTP, default STP mode is RSTP.
- Enter Priority value between 0 - 61440, in multiples of 4096.
- Hello Time is the time Interval between BPDU transmission, set the value between 1-10 seconds.
- Forward Delay is the length of time spent in listening state, set the value between 4 - 30 sec.
- The length of Max Age time that the switch retains information learned from BPDUs, set the value between 6 - 40 sec.
- Enter STP aging Timer between 10 - 1000000 seconds.
Save your changes.
