Replace a

Prisma SD-WAN

ION Device

Select
Workflows
Devices
Claimed Devices
, select the device you want to configure.
From the ellipsis menu, select
Replace the device
to begin the RMA process.
Select a replacement device.
There may be multiple replacement devices, so make sure to select the correct device.
Confirm that the devices are of the same model. For example, an ION 3000 device can only be replaced by another ION 3000 device, or a virtual device can only be replaced by another virtual device that consists of the same bypass pairs.
Click
Next
to choose a Snapshot for the new device.
The replacement device must be online and claimed for the Snapshot to be applied.
After the snapshot is created, click
Download Snapshot Before Continuing
.
Select
Download to File or Copy to Clipboard
as required.
Click
Next
to continue after you have downloaded the snapshot.
Assign the replacement device to the site.
The RMA Wizard will take the site information from the failed device and transfer it to the replacement device. When the replacement device is assigned to the site and the faulty device is unassigned, the service may be affected temporarily.
Click
Next
to proceed to configuring the device.
Click
Done
when you have copied the manual configurations to complete the replacement process.
The RMA Replacement Wizard automatically transfers the configuration from the old device to the new device. There may be flags for the functions that need to be manually configured. Configurations that are not copied will be listed in a text box.
A final screen displays when the device is successfully configured. In case of any warnings, download the warnings before you exit the wizard.
Click
Done
to finish the device replacement process.