Prisma SD-WAN
Configure IoT SNMP Start Nodes
Table of Contents
Expand All
|
Collapse All
Prisma SD-WAN Docs
-
-
-
- CloudBlade Integrations
- CloudBlades Integration with Prisma Access
-
-
-
-
- 5.6
- 6.1
- 6.2
- 6.3
- 6.4
- 6.5
- New Features Guide
- On-Premises Controller
- Prisma SD-WAN CloudBlades
- Prisma Access CloudBlade Cloud Managed
- Prisma Access CloudBlade Panorama Managed
Configure IoT SNMP Start Nodes
Learn how to configure IoT SNMP start nodes in Prisma SD-WAN.
Where Can I Use This? | What Do I Need? |
---|---|
|
|
You can configure a branch site ION device or a DC ION device as a start
node for the discovery process. In this configuration you can specify a list of IP
addresses (IPv4) that can be used as the start address for network discovery and
subsequent device discovery.
Each site supports a maximum of 128 such starting endpoints. It also
supports a scope (per starting address) that limits the discovery to a set of
devices within the specified scope. The IP addresses configured in the list should
be reachable from the ION devices that are associated with the site.
- Select Sites, select a site and click Configure IoT SNMP Start Nodes.Add a Name.Enter a Start Node.This is the IP address that the ION device uses as a starting point for network and device discovery.(Optional)Enter a Description and Tags.(Optional) Enter separate subnets for Subnets Scope.A maximum of eight subnets can be entered per start node. This limits the discovery to a set of devices within the specified scope.Click Save.