Bulk Upgrade ION Device Image Software
Table of Contents
Expand all | Collapse all
-
-
- Add a Branch
- Add a Data Center
- Add a Branch Gateway
- Configure Circuits
- Configure Internet Circuit Underlay Link Aggregation
- Configure Private WAN Underlay Link Quality Aggregation
- Configure Circuit Categories
- Configure Device Initiated Connections for Circuits
- Add Public IP LAN Address to Enterprise Prefixes
- Manage Data Center Clusters
- Configure a Site Prefix
- Configure a DHCP Server
- Configure NTP for Prisma SD-WAN
- Configure the ION Device at a Branch Site
- Configure the ION Device at a Data Center
- Switch a Site to Control Mode
- Allow IP Addresses in Firewall Configuration
-
- Configure a Controller Port
- Configure Internet Ports
- Configure WAN/LAN Ports
- Configure a Loopback Interface
- Configure a PoE Port
- Configure and Monitor LLDP Activity and Status
- Configure a PPPoE Interface
- Configure a Layer 3 LAN Interface
- Configure Application Reachability Probes
- Configure a Secondary IP Address
- Configure a Static ARP
- Configure a DHCP Relay
- Configure IP Directed Broadcast
- VPN Keep-Alives
-
- Configure Prisma SD-WAN IPFIX
- Configure IPFIX Profiles and Templates
- Configure and Attach a Collector Context to a Device Interface in IPFIX
- Configure and Attach a Filter Context to a Device Interface in IPFIX
- Configure Global and Local IPFIX Prefixes
- Flow Information Elements
- Options Information Elements
- Configure the DNS Service on the Prisma SD-WAN Interface
- Configure SNMP
-
-
- Prisma SD-WAN Branch Routing
- Prisma SD-WAN Data Center Routing
-
- Configure Multicast
- Create a WAN Multicast Configuration Profile
- Assign WAN Multicast Configuration Profiles to Branch Sites
- Configure a Multicast Source at a Branch Site
- Configure Global Multicast Parameters
- Configure a Multicast Static Rendezvous Point (RP)
- Learn Rendezvous Points (RPs) Dynamically
- View LAN Statistics for Multicast
- View WAN Statistics for Multicast
- View IGMP Membership
- View the Multicast Route Table
- View Multicast Flow Statistics
- View Routing Statistics
- Prisma SD-WAN Incident Policies
-
- Prisma SD-WAN Branch HA Key Concepts
- Configure Branch HA
- Configure HA Groups
- Add ION Devices to HA Groups
- View Device Configuration of HA Groups
- Edit HA Groups and Group Membership
-
- Configure Branch HA with Gen-1 Platforms (2000, 3000, 7000, and 9000)
- Configure Branch HA with Gen-2 Platforms (3200, 5200, and 9200)
- Configure Branch HA with Gen-2 Embedded Switch Platforms (1200-S or 3200-L2)
- Configure Branch HA for Devices with Software Cellular Bypass (1200-S-C-5G)
- Configure Branch HA for Platforms without Bypass Pairs
- Prisma SD-WAN Clarity Reports
- Prisma SD-WAN Incidents and Alerts
Bulk Upgrade ION Device Image Software
Learn more about how to upgrade the ION device image software for multiple ION devices in
Prisma SD-WAN
.Where Can I Use
This? | What Do I
Need? |
---|---|
|
|
You can upgrade the device image software of multiple ION devices at a time to a target version
by using the bulk software upgrade feature.
- Upgrade ION device image software for multiple ION devices.
- Select.WorkflowsPrisma SD-WAN SetupDevicesClaimed DevicesAlternatively, you can select claimed devices from theMonitortab.
- SelectBulk Software Upgradesfrom the ellipsis menu.
- Select the software version to upgrade your device.
- Select the devices that you want to upgrade.You can select a maximum of 50 devices at a time. You will not be able to select devices which are incompatible with the target version. If a device is incompatible with the target version, you may have to upgrade it to an intermediate version first.
- ClickSubmit.
- Schedule bulk upgrade of ION device image software.You can schedule image software upgrades for multiple ION devices.
- Select.WorkflowsPrisma SD-WAN SetupDevicesClaimed Devices
- SelectBulk Software Upgradesfrom the ellipsis menu.
- SelectConfigure ScheduleinStep 3: Schedule devices for upgradeon theBulk Software Upgradescreen after completingStep1: Select a target software versionandStep2: Select up to 50 devices to upgrade.
- Select the devices to schedule for upgrade.
- SelectUpgrade TypeasUpgradeto either upgrade the software orDownloadto only download the device software image.
- Choose aSoftware Versionfor the upgrade.
- Select theSchedule Type.Selectimmediatelyto upgrade your device software immediately or choosecustomto upgrade your device software later.
- Select aDownload DateandUpgrade Datefrom the calendar.
- (Optional)Enter values between 5 and 59 minutes forMax Download TimeandMax Upgrade Time.By default, the system attempts to download or upload three times until a successful download or upload. However, if a time is specified for maximum download time and maximum upgrade time, multiple attempts are made within the specified time until a successful download or upgrade.If the time set forMax Download TimeandMax Upgrade Timeelapses while the download is in progress, the device proceeds with the download until the operation is complete. If there is a failure of any type, the upgrade process needs to be rescheduled.
- ClickScheduleand accept the confirmation.