Configure IPFIX
Table of Contents
Expand all | Collapse all
-
-
- Configure Circuits
- Configure Circuit Categories
- Configure Device Initiated Connections for Circuits
- Add Public IP LAN Address to Enterprise Prefixes
- Add a Branch
- Add a Data Center
- Manage Data Center Clusters
- Configure a Site Prefix
- Configure a DHCP Server
- Configure NTP for Prisma SD-WAN
- Enable IoT Device Visibility in Prisma SD-WAN
- Configure the ION Device at a Branch Site
- Configure the ION Device at a Data Center
- Switch a Site to Control Mode
- Allow IP Addresses in Firewall Configuration
-
- Configure a Controller Port
- Configure Internet Ports
- Configure WAN/LAN Ports
- Configure a Sub-Interface
- Configure a Loopback Interface
- Configure a PPPoE Interface
- Configure a Layer 3 LAN Interface
- Configure Application Reachability Probes
- Configure a Secondary IP Address
- Configure a Static ARP
- Configure a DHCP Relay
- Configure IP Directed Broadcast
-
-
- Configure IPFIX
- Configure IPFIX Profiles
- Configure IPFIX Templates
- Configure Collector Contexts
- Configure Filter Contexts
- Configure Global IPFIX Prefixes
- Configure Local IPFIX Prefixes
- Attach an IPFIX Profile to an ION Device
- Attach a Collector Context to a Device Interface
- Attach a Filter Context to a Device Interface
- Configure High Availability (HA) for IPFIX
- Flow Information Elements
- Options Information Elements
- Configure SNMP
-
-
-
- Prisma SD-WAN Branch Routing
- Prisma SD-WAN Data Center Routing
-
- Configure Multicast
- Create a WAN Multicast Configuration Profile
- Assign WAN Multicast Configuration Profiles to Branch Sites
- Configure a Multicast Source at a Branch Site
- Configure Global Multicast Parameters
- Configure a Multicast Static Rendezvous Point (RP)
- Learn Rendezvous Points (RPs) Dynamically
- View LAN Statistics for Multicast
- View WAN Statistics for Multicast
- View IGMP Membership
- View the Multicast Route Table
- View Multicast Flow Statistics
- Prisma SD-WAN Incident Policies
-
- Prisma SD-WAN Branch HA Key Concepts
- Configure Branch HA
- Configure HA Groups
- Add ION Devices to HA Groups
- View Device Configuration of HA Groups
- Edit HA Groups and Group Membership
-
- Configure Branch HA with Gen-1 Platforms (2000, 3000, 7000, and 9000)
- Configure Branch HA with Gen-2 Platforms (3200, 5200, and 9200)
- Configure Branch HA with Gen-2 Embedded Switch Platforms (1200-S or 3200-L2)
- Configure Branch HA for Devices with Software Cellular Bypass (1200-S-C-5G)
- Configure Branch HA for Platforms without Bypass Pairs
-
-
- Native SASE Integration with Prisma SD-WAN
- Connect a Single Prisma SD-WAN Site to Prisma Access
- Connect Multiple Prisma SD-WAN Sites to Prisma Access
- Edit Application Policy Network Rules
- Understand Service and Data Center Groups
- Verify Standard VPN Endpoints
- Configure Standard Groups
- Assign Domains to Sites
- Prisma SD-WAN Incidents and Alerts
Configure IPFIX
Learn how to configure IPFIX globally for multiple ION
devices or for a single ION device.
Configure IPFIX to apply to all sites and
devices globally or configure IPFIX for an ION device to override
the global IPFIX configuration.
- Configure IPFIX globally for multiple ION devices.Configure IPFIX globally by creating an IPFIX profile and attaching it to multiple ION devices.
- To verify that you have pushed the IPFIX profile to a device, select. The IPFIX configuration bound to the device displays in theProfilesEdit a profileView Device BindingsDevice Bindingcolumn.
- Configure IPFIX on a device to override the global IPFIX profile settings.You can optionally configure device specific IPFIX parameters to override parameters such as collectors, filters, and sampling configured in an IPFIX profile.
- Select.ManageDevicesClaimedSelect a deviceConfigure the deviceIPFIX
- Enter a name and select a profile from theIPFIX Profiledrop-down andSave.
- When you create a new profile at the device level, it becomes a part of the global profiles and you can use it for multiple devices.
- You can optionally configure an IPFIX template, configure collectors, filters and sampling on the ION device to override the parameters configured in the IPFIX profile.
The ION device uses the collectors, filters, and sampling configured in the IPFIX profile, unless you provide optional overriding configuration.