Configure DSCP
Table of Contents
Expand all | Collapse all
-
-
- Configure Circuits
- Configure Circuit Categories
- Configure Device Initiated Connections for Circuits
- Add Public IP LAN Address to Enterprise Prefixes
- Add a Branch
- Add a Data Center
- Manage Data Center Clusters
- Configure a Site Prefix
- Configure a DHCP Server
- Configure NTP for Prisma SD-WAN
- Enable IoT Device Visibility in Prisma SD-WAN
- Configure the ION Device at a Branch Site
- Configure the ION Device at a Data Center
- Switch a Site to Control Mode
- Allow IP Addresses in Firewall Configuration
-
- Configure a Controller Port
- Configure Internet Ports
- Configure WAN/LAN Ports
- Configure a Sub-Interface
- Configure a Loopback Interface
- Configure a PPPoE Interface
- Configure a Layer 3 LAN Interface
- Configure Application Reachability Probes
- Configure a Secondary IP Address
- Configure a Static ARP
- Configure a DHCP Relay
- Configure IP Directed Broadcast
-
-
- Configure IPFIX
- Configure IPFIX Profiles
- Configure IPFIX Templates
- Configure Collector Contexts
- Configure Filter Contexts
- Configure Global IPFIX Prefixes
- Configure Local IPFIX Prefixes
- Attach an IPFIX Profile to an ION Device
- Attach a Collector Context to a Device Interface
- Attach a Filter Context to a Device Interface
- Configure High Availability (HA) for IPFIX
- Flow Information Elements
- Options Information Elements
- Configure SNMP
-
-
-
- Prisma SD-WAN Branch Routing
- Prisma SD-WAN Data Center Routing
-
- Configure Multicast
- Create a WAN Multicast Configuration Profile
- Assign WAN Multicast Configuration Profiles to Branch Sites
- Configure a Multicast Source at a Branch Site
- Configure Global Multicast Parameters
- Configure a Multicast Static Rendezvous Point (RP)
- Learn Rendezvous Points (RPs) Dynamically
- View LAN Statistics for Multicast
- View WAN Statistics for Multicast
- View IGMP Membership
- View the Multicast Route Table
- View Multicast Flow Statistics
- Prisma SD-WAN Incident Policies
-
- Prisma SD-WAN Branch HA Key Concepts
- Configure Branch HA
- Configure HA Groups
- Add ION Devices to HA Groups
- View Device Configuration of HA Groups
- Edit HA Groups and Group Membership
-
- Configure Branch HA with Gen-1 Platforms (2000, 3000, 7000, and 9000)
- Configure Branch HA with Gen-2 Platforms (3200, 5200, and 9200)
- Configure Branch HA with Gen-2 Embedded Switch Platforms (1200-S or 3200-L2)
- Configure Branch HA for Devices with Software Cellular Bypass (1200-S-C-5G)
- Configure Branch HA for Platforms without Bypass Pairs
-
-
- Native SASE Integration with Prisma SD-WAN
- Connect a Single Prisma SD-WAN Site to Prisma Access
- Connect Multiple Prisma SD-WAN Sites to Prisma Access
- Edit Application Policy Network Rules
- Understand Service and Data Center Groups
- Verify Standard VPN Endpoints
- Configure Standard Groups
- Assign Domains to Sites
- Prisma SD-WAN Incidents and Alerts
Configure DSCP
Lets learn on configuring DSCP in
Prisma SD-WAN
.Quality of Service (QoS) policies allow you
to specify differentiated services code point (DSCP) values, priority, and
traffic type. You can define DSCP mapping in any policy set, but
only the first match is used for a decision. The order of DSCP mapping
lookup is the same as a policy set order.
If an application
traffic flow matches any two rules defined in the default rule policy
set and matches the DSCP value defined in DSCP mapping, the flow
is placed in the priority queue and transfer type specified in the
DSCP map. The table below shows the mapping of DSCP values, priority,
and traffic type.
DSCP Values | Priority | Traffic Type |
---|---|---|
EF | Platinum | Audio |
AF41, AF31 | Gold | Video |
CS6 | Platinum | Transactional |
AF21 | Silver | Transactional |
AF11 | Bronze | Bulk |
- Select.ManagePoliciesQoSQoS StacksAdvancedQoS Set
- For aQoS Set, click the ellipsis menu.
- SelectDSCP Configuration.
- On theDSCP Mappingsscreen, enterDSCP Hex values.You can select up to 16 DSCP values from the available list.
- Select aPriorityand the type of traffic from theTransfer Typedrop-down.
- (Optional)ClickAdd Configurationto define additional DSCP configurations, if required.
- Save & Exit.