Prisma SD-WAN ION CLI Reference
    : dump bypass-pair config
    Focus
    Focus
    1. Home
    2. Prisma
    3. Prisma SD-WAN
    4. Prisma SD-WAN ION CLI Reference
    5. Use CLI Commands
    6. Dump Commands
    7. dump bypass-pair config

    Prisma SD-WAN ION CLI Reference

    dump bypass-pair config

    Table of Contents

    dump bypass-pair config

    Use the
    dump bypass-pair config
     command to display bypass-pair configuration details. Information displayed includes port names configured as part of a bypass-pair, status of LAN state propagation—whether enabled or not, Hardware Relay connection status, admin state, and use of the port for public or private networks.

    Command

    dump bypass-pair config

    Options

    None

    Command Notes

    Role
    Super, Read Only, Monitor
    Related Commands
    —
    Introduced in
    Release 4.6.1

    Example

    dump bypass-pair config
				Bypass Pair : wan 1 & lan 1
				Propagate Lan State : No
				Hardware Relay : Yes
				Admin State : up
				Used For : private_wan
				Attached Network :
				Network ID : 15132379689770097
				Name : default_lahor_523862800
				VLAN : 10
				Scope : global
				IP address at Router: 192.168.5.10/24
				Network ID : 15208455382440118
				Name : default_lahore_97264634
				VLAN : 110Scope : global
				IP address at Router: 192.168.110.10/24
				Network ID : 15208455388040127
				Name : default_lahore_623716095
				VLAN : 220
				Scope : global
				IP address at Router: 192.168.220.10/24
				Bypass Pair : wan 3 & lan 3
				Propagate Lan State : No
				Hardware Relay : Yes
				Admin State : up
				Used For : none
				Bypass Pair : wan 4 & lan 4
				Propagate Lan State : No
				Hardware Relay : Yes
				Admin State : up
				Used For : public

    Recommended For You

    © 2024 Palo Alto Networks, Inc. All rights reserved.