Focus

Prisma SD-WAN ION CLI Reference

dump routing multicast pim

Table of Contents

dump routing multicast pim

Use the dump routing multicast pim command to display the routing multicast protocol independent multicast (pim) specific configurations of a device.

Command

dump routing multicast pim <rp (all |
				address | dynamic)| neighbor | bsrinfo>

Options

rp	Enter rp `all/ rp address/ dynamic` to display all the details related to routing multicast pim.
neighbor	Enter neighbor to display PIM neighbors available for the ION device.
bsrinfo	Enter bsrinfo to display PIM bsrinfo available for the ION device. `Release 6.0.1`

Command Notes

Role	Super, Read Only, Monitor
Related Commands	dump routing multicast status
Introduced in	Release 5.6.1

Example

dump routing multicast pim neighbor
				LAN Neighbors
				--------------
				Interface                Neighbor    Uptime  Holdtime  DR Pri
				eth4                      2.2.2.1  24:29:40  00:01:36     900
				eth4                      1.1.1.1  24:29:40  00:01:36     900
				eth4                      9.9.9.1  24:29:40  00:01:36     900
				eth4                     1.1.1.10  24:29:40  00:01:36  1999999
				
				Total Active LAN neighbor count : 4
				
				WAN Neighbors
				--------------
				Neighbor         State   Uptime
				London           UP      24:29:01
				
				Total Active WAN neighbor count : 1
				
				dump routing multicast pim rp all
				RP address       group/prefix-list   OIF       I am RP    Source
				1.1.1.1          224.0.0.0/4         London     no        Static
				
				dump routing multicast pim rp address=1.1.1.1
				RP address   group/prefix-list   OIF     I am RP    Source
				1.1.1.1      224.0.0.0/4         London     no      Static

dump routing multicast mroute

dump routing multicast sources