By default, the firewall is deployed with two network interfaces—
one for management traffic and one data traffic. Make sure that
the first ethernet interface on the firewall, which is its management
interface, is connected to the vSwitch assigned for device management.
Do not power on the firewall.
Attach the bootstrap image to the firewall.
In Hyper-V Manager, select the VM-Series
firewall from the
Under Media, click the
and select your
uploaded ISO image.
exit the virtual machine settings.
Power on the firewall. The firewall will begin with
the bootstrapping process, which will take several minutes. The
status messages on the success or failure of the process will display
on the console.