End-of-Life (EoL)

Configure a Static Default Route

Configure a static default route to direct traffic from the Ethernet subinterfaces to the subnet router.
  1. Select
    Network
    Virtual Routers
    and click on the virtual router you created previously in this procedure.
  2. Select
    Static Routes
    IPv4
    and click
    Add
    .
  3. Enter a descriptive
    Name
    .
  4. Enter 0.0.0.0/0 in the
    Destination
    field.
  5. From the
    Interface
    drop-down, select the aggregate Ethernet group you created previously in this procedure.
  6. Select IP Address from the
    Next Hop
    drop-down and enter the IP address of the next hop router.
  7. Click
    OK
    .
  8. Click
    OK
    again.
  9. Commit
    your changes.
    configure-static-default-route.png

Recommended For You