End-of-Life (EoL)

Install the NIC Driver on ESXi

For the best performance, use SR-IOV with Intel 10GB network interfaces which requires the ixgbe 4.4.1 driver to support multiple queues for each interface.
  1. Obtain a list of network interfaces on the ESXi host.
    1. Log in to the ESXi host CLI.
    2. Use the following command to return a list of network interfaces:
      esxcli network nic list
  2. Determine the driver version for a particular interface.
    You can use either
    to determine the currently-installed driver version. The following example uses vmnic4 and returns driver version 3.21.6.
    • ethtool:
      ethtool -l
      $ ethtool -I vmnic4 driver: ixgbe version: 3.21.6iov firmware-version: 0x80000389 bus-info: 0000:04:00.0
    • esxcli:
      esxcli network nic get -n
      esxcli network nic get -n vmnic4
      Advertised Auto Negotiation: true Advertised Link Modes: Auto Negotiation: true Cable Type: Current Message Level: 7 Driver Info: Bus Info: 0000:04:00.0 Driver: ixgbe Firmware Version: 0x80000389 Version: 3.21.6iov Link Detected: false Link Status: Down Name: vmnic4 PHYAddress: 0 Pause Autonegotiate: true Pause RX: true Pause TX: true Supported Ports: FIBRE Supports Auto Negotiation: true Supports Pause: true Supports Wakeon: false Transceiver: external Wakeon: None
  3. Install the new driver.
    1. Download the 4.4.1 driver from the VMware website.
    2. Copy the file to the ESXi host datastore.
    3. Enable maintenance mode on the ESXi host.
    4. Use one of the following commands to install the new driver.
      • $
        esxcli software vib install -d
        <path to driver .zip file>
      • $
        esxcli software vib install -v
        <path to driver .vib file>

Recommended For You