Configure Route Redistribution and OSPF

Configure route redistribution.

Select
Network
Virtual Routers
and click on the virtual router you created earlier.
Select
Redistribution Profile
IPv4
Add
.
Enter a descriptive
Name
for your redistribution profile.
Enter a priority.
For
Redistribute
, select
Redist
.
Check
connect
and
static
under
General Filters
.
Click
OK
.



Configure OSPF.

Select
Network
Virtual Routers
and click on the virtual router you created earlier.
Select
Router Settings
ECMP
and select
Enable
.
Select
OSPF
and choose
Enable
.
Enter the OSPF
Router ID
.
Under
Area
, click
Add
.
Enter the
Area ID
. This value must match the value you assigned when you created the external routed network on the APIC. On the firewall, this must be entered in dotted decimal form. For example, if you entered an Area ID of 10 in the APIC, the equivalent on the firewall is 0.0.0.10.
Select
Interface
Add
.
Enter the interface that connects to your external network EPG and click
OK
.
Select
Export Rules
Add
.
Select the Redistribution Profile you created above from the
Name
drop-down and click
OK
.
Select
Allow Redistribute Default Route
.
Click
OK
.