Service Template

The service template defines the parameters of the service instance, such as the software image, virtual machine flavor, service type, and interfaces. Service templates are configured within the scope of a domain and can be used on all projects within the specified domain.
Service Template (ST Config)
S_Tmp_nameThe name of the service template.
S_Tmp_versionThe service template version. The default value is 2. Do not change this parameter because service template version 2 is required to support port tuples.
S_Tmp_service_modeService mode is the network mode used by the VM-Series firewall service instance. For the L3 network template, the default value is in-network. For the virtual wire template, the default value is transparent.
S_Tmp_service_typeThe type of service being deployed by the template. The default value is firewall and should not be changed when deploying the VM-Series firewall.
S_Tmp_image_nameThis parameter specifies the VM-Series base image used by the Heat template when deploying the VM-Series firewall. Edit this parameter to match the name of the VM-Series firewall image uploaded to your OpenStack environment.
S_Tmp_flavorThis parameter defines the hardware resources allocated to the VM-Series firewall. The default value is m1.large.
S_Tmp_interface_type_mgmt S_Tmp_interface_type_left S_Tmp_interface_type_rightThe parameters define the interface type for management, left, and right interfaces.
domainThe domain where this service template is tied to. The default value is default-domain.

Related Documentation