Sample init-cfg.txt File

The following sample basic configuration (init-cfg.txt) files shows all the parameters that are supported in the file; required parameters are in bold.
Sample init-cfg.txt file (Static IP Address)
Sample init-cfg.txt file (DHCP Client)
type=static
ip-address=10.5.107.19
default-gateway=10.5.107.1
netmask=255.255.255.0
ipv6-address=2001:400:f00::1/64
ipv6-default-gateway=2001:400:f00::2*
hostname=Ca-FW-DC1
vm-auth-key=755036225328715
panorama-server=10.5.107.20
panorama-server-2=10.5.107.21
tplname=FINANCE_TG4
dgname=finance_dg
dns-primary=10.5.6.6
dns-secondary=10.5.6.7
op-command-modes=jumbo-frame, mgmt-interface-swap**
op-cmd-dpdk-pkt-io=***
dhcp-send-hostname=no
dhcp-send-client-id=no
dhcp-accept-server-hostname=no
dhcp-accept-server-domain=no
type=dhcp-client
ip-address=
default-gateway=
netmask=
ipv6-address=
ipv6-default-gateway=
hostname=Ca-FW-DC1
vm-auth-key=755036225328715
panorama-server=10.5.107.20
panorama-server-2=10.5.107.21
tplname=FINANCE_TG4
dgname=finance_dg
dns-primary=10.5.6.6
dns-secondary=10.5.6.7
op-command-modes=jumbo-frame, mgmt-interface-swap**
op-cmd-dpdk-pkt-io=***
dhcp-send-hostname=yes
dhcp-send-client-id=yes
dhcp-accept-server-hostname=yes
dhcp-accept-server-domain=yes
You cannot specify the management IP address and netmask configuration for the VM-Series firewall in AWS. If defined, the firewall ignores the values you specify because AWS uses a back-end metadata file to assign the management IP address and netmask.
*The IPv6 default gateway is required if you include an IPv6 address.
**The
mgmt-interface-swap
operational command pertains only to a VM-Series firewall in AWS or Google Cloud.
***The
op-cmd-dpdk-pkt-io=off
is for disabling DPDK on the VM-Series firewall on ESXi, KVM, and Google Cloud (DPDK is enabled by default).

Related Documentation