Home
EN
Location
Documentation Home
Palo Alto Networks
Support
Live Community
Knowledge Base
MENU
Home
VM-Series
VM-Series Deployment Guide
Set Up a Firewall in Cisco ACI
Integrate the Firewall with Cisco ACI in Network Policy Mode
Deploy the Firewall to Secure East-West Traffic in Network Policy Mode
Configure a Static Default Route
Document:
VM-Series Deployment Guide
Configure a Static Default Route
Download PDF
Last Updated:
Jan 22, 2021
Current Version:
9.0
Version 9.1
Version 9.0
Version 8.1
Version 8.0 (EoL)
Version 10.0
Previous
Next
Configure a Static Default Route
Configure a static default route to direct traffic from the Ethernet subinterfaces to the subnet router.
Select
Network
Virtual Routers
and click on the virtual router you created previously in this procedure.
Select
Static Routes
IPv4
and click
Add
.
Enter a descriptive
Name
.
Enter 0.0.0.0/0 in the
Destination
field.
From the
Interface
drop-down, select the aggregate Ethernet group you created previously in this procedure.
Select IP Address from the
Next Hop
drop-down and enter the IP address of the next hop router.
Click
OK
.
Click
OK
again.
Commit
your changes.
Previous
Next
Recommended For You
Recommended Videos
Recommended videos not found.