Deploy the Template to Azure
Use the following instructions to deploy the template to Azure.
- Deploy the template.Currently not available for deploying in Azure China.
- Access the template from https://github.com/PaloAltoNetworks/azure-applicationgateway
- ClickDeploy to Azure.
- Fill in the details for deploying the template. See VM-Series and Azure Application Gateway Template Parameters for a description and the default values, if any, for each parameter.At a minimum, you have to pick theAzure Subscription,Resource Group,Location,Storage Account Name, and aUsername/passwordorSSH Keyfor the administrative account on the VM-Series firewalls.
- ClickPurchaseto accept the terms and conditions and deploy the resources.If you have validation errors, click to view the details and fix your errors.
- On the Azure portal, verify that you have successfully deployed the template resources, including the VM-Series firewalls.
- Select, select the resource group.DashboardResource Groups
- SelectOverviewto review all the resources that have been deployed. The deployment status should displaySucceeded.
- Note the Public IP address or the DNS name assigned toeth0-VM-Series0andeth0-VM-Series1to access the management interface of the VM-Series firewalls.
- Log in to the firewalls.
- Using a secure connection (https) from your web browser, log in to the IP address for eth0-VM-Series0 or the DNS name for the firewall.
- Enter the username/password you defined in the parameters file. You will see a certificate warning; that is okay. Continue to the web page.
- Configure the VM-Series firewall.
- Configure the dataplane network interfaces as Layer 3 interfaces on the firewall ().NetworkInterfacesEthernet
- Add a static rule to the virtual router on the firewall. This static rule specifies the firewall’s untrust interface IP address as the nexthop address for any traffic destined for ethernet1/1. (, select the router and clickNetworkVirtual RoutersStatic Routes).
- Create security policy rules () to allow inbound and outbound traffic on the firewall.PoliciesSecurity
- Add NAT policies (). You must create destination NAT and source NAT rules on the firewall to send traffic to the web servers and back out to the client who initiated the request.PoliciesNATThe destination NAT rule is for all traffic that arrives on the firewall’s untrust interface. This rule is required to translate the destination IP address on the packet to that of the internal load balancer so that all traffic is directed to the internal load balancer and on to the backend web servers.The source NAT rule is for all traffic from the backend web server and destined to the untrust interface on the firewall. This rule translates the source address to the IP address of the trust interface on the firewall
- Commityour changes.
- Import the sample configuration file:
- Download and save the Sample Configuration File to your local client.
- Select, clickDeviceSetupOperationsImport named configuration snapshot,Browseto the sample configuration file that you have saved locally, and clickOK.
- ClickLoad named configuration snapshot, select theNameof the sample configuration file you just imported, and clickOK.
- Change the IP address of the address objects and the static route to match the IP address from the CIDR block you used. Update address objects to use the private IP addresses for eth1-VM-Series0 and eth1-VM-Series1.
- Important!Create a new admin user account. SelectandDeviceAdministratorsAdda new account.
- Modify theHostnamein the General Settings widget in.DeviceSetupManagement
- Commityour changes, and log out. The commit overwrites the running configuration with the sample configuration file and updates you just made. On commit, the hostname and the administrator user account that you specified when deploying the template are overwritten. You will now need to log in using the new admin user account and password.
- Log in to the firewall—Use the credentials you created and delete the pandemo administrative account imported as part of the sample configuration file.
- Log in and configure the other instance of the VM-Series firewall.
- Verify that you have configured the firewalls properly.From your web browser, use http to access the IP address or DNS name for the app gateway. You should be able to view the default Apache 2 Ubuntu web page.If you have used the sample configuration firewall, log in to the firewall and view the Traffic logs generated on session start in.MonitorLogsTraffic
Recommended For You
Recommended videos not found.