WildFire Appliance Configuration Mode Command Reference
This section contains command reference information for the following Configuration mode commands that are specific to the WildFire appliance software. All other commands that are part of the WildFire appliance software are identical to PAN-OS as described in the PAN-OS 8.0 CLI Quick Start.
- set deviceconfig cluster
- set deviceconfig high-availability
- set deviceconfig setting management
- set deviceconfig setting wildfire
- set deviceconfig system eth2
- set deviceconfig system eth3
- set deviceconfig system panorama-server
- set deviceconfig system panorama-server-2
- set deviceconfig system update-schedule
- set deviceconfig system vm-interface
Use the WildFire Appliance CLI
Use the WildFire Appliance CLI The following topics describe the CLI commands that are specific to the WildFire™ appliance software. All other commands, such as ...
WildFire Appliance Operational Mode Command Reference
WildFire Appliance Operational Mode Command Reference This section contains command reference information for the following Operational mode commands that are specific to the WildFire appliance ...
Add Standalone WildFire Appliances to Manage with Panorama
Add Standalone WildFire Appliances to Manage with Panorama You can manage up to 200 WildFire appliances with a Panorama M-Series or virtual appliance. The 200 ...
Configure the WildFire Appliance
Configure the WildFire Appliance This section describes the steps required to integrate a WildFire appliance into a network and perform basic setup. Rack mount and ...
WildFire Appliance CLI Operations
WildFire Appliance CLI Operations Access WildFire Appliance Operational and Configuration Modes Display WildFire Appliance Software CLI Command Options Restrict WildFire Appliance CLI Command Output Set ...
Upgrade a WildFire Appliance
Upgrade a WildFire Appliance Use the following workflow to upgrade the WildFire appliance operating system. If you want to upgrade an appliance that is part ...
Managed WildFire Appliance Tasks
Managed WildFire Appliance Tasks You can add, remove, and manage standalone WildFire appliances on a Panorama device. After you add standalone appliances, you can add ...
Known Issues Specific to the WF-500 Appliance
Known Issues Specific to the WF-500 Appliance The following list includes known issues specific to WildFire® 8.0 releases running on the WF-500 appliance. See also ...
Configure a Cluster and Add Nodes Locally
Configure a Cluster and Add Nodes Locally When you add nodes to a cluster, the cluster automatically sets up communication between nodes based on the ...