Expand all | Collapse all
Interfaces Behavior
PAN-OS specific behavior for the openconfig-interfaces
model.
Review the
deviation file before
using the openconfig-interfaces model to familiarize yourself with
supported paths.
General Behavior
When using
the interfaces model with PAN-OS:
To set the IPv4
address of the main interface instead of a subinterface, use 0 as
the index of the subinterface. If the interface doesn't exist, the
interface will be created.
Loopback interfaces only support non-zero subinterface indexes.
Interfaces will be added to default_l3 or default_l2 zone
based on their interface types (Layer3 or Layer2). These zones will
automatically be created with the first interface additions of these
types.
Setting /interfaces/interface/config/auto-notification to
false converts port-speed to SPEED_1G and duplex-mode to Full.
Local-Link IPv6 addresses are not shown in Get requests.
PAN-OS deletes then adds entries when editing the interface
host portion value, IPv6 address object if the Use Interface as
Host-ID Portion check box is checked in the user interface, and
comments.
VLAN Interfaces
PAN-OS requires static ARP entries for VLAN interfaces to
specify the physical output interface. The OpenConfig model does not
provide that data so the neighbor data (ARP entries) can only be
retrieved.