Learn how to monitor and manage your registered Autonomous
DEM remote sites.
Use the following steps to begin monitoring
your remote sites’ digital experiences with ADEM:
Enable ADEM for your Prisma Access remote sites.
ADEM for Remote Sites can be enabled only if aggregate
bandwidth is enabled on Prisma Access. ADEM is supported for your
Prisma Access and Prisma SD-WAN remote sites on all the ION platforms
running version 5.6.1 and above.
The steps for enabling ADEM
for your remote sites depends on if you are using Panorama Managed Prisma
Access or Cloud Managed Prisma
Access. After you enable ADEM on Prisma Access with aggregate
bandwidth enabled on the compute location, the ADEM configuration
will be pushed to the Prisma SD-WAN remote site devices allowing
the remote sites to register with the ADEM portal.
To see all registered ADEM users from the Prisma Access
app on the hub.
Select Autonomous DEMSettingsRemote Site Agent Management.
This
tab shows a list of all the remote sites. These sites will have
the same names that you have configured on your Prisma SD-WAN remote
sites. It also displays the model number, the host name, if they
are configured for high availability, and whether they are online.
You can enable or disable monitoring for each site and you can delete them
also from this tab.
Application tests are always executed
from the devices that are active on the remote sites. The devices
are registered and tests executed on them based on the site name
regardless of the appliance on which the tests are running. As long
as the devices are a part of the same remote site, all the configurations
are tracked based on the site name. So, even if you change your
device at a later time, as long as the device is on the same remote
site, ADEM will continue to run the tests on them.
Assign app tests to your registered remote sites.
When you create an app test, you can assign it to ADEM
remote sites or all registered ADEM users (default) or choose specific
users to assign a test to, or you can assign the tests to both remote
sites and users. If you have already created a test to be assigned
to remote sites, any tests will automatically start running on the
remote site as soon as it registers with ADEM. Once a test is started
on a remote site, it will send metrics from the app test to the
ADEM service every five minutes.
To temporarily stop running assigned app tests on the
Prisma SD-WAN remote sites, select the remote site for which you
want to suspend app tests and toggle the Monitoring State.
Note that if you disable monitoring, the remote site is
still counted as a licensed ADEM site.
To unregister a remote site from ADEM, select the remote
site to remove and then click the trash can icon in the Action column.
Unregistering a remote site frees up an ADEM license.
To set the upgrade preferences for all the remote sites,
click Upgrade Now or Auto Upgrade from
the Upgrade Options menu.