Enterprise DLP
Panorama
Table of Contents
Panorama
Panorama
Configure the
Enterprise Data Loss Prevention (E-DLP)
snippet settings on your Panorama™ management server
to specify if and how snippets are stored.- Log in to thePanoramaweb interface.
- Selectand edit the Snippet Settings.PanoramaDLPConfiguration
- Check (enable)Store Snippets of Sensitive Datato store the snippets of sensitive data that match your data patterns in the DLP cloud service.
- Configure how toMask Sensitive Fieldfor storage in the DLP cloud service.
- no-mask—Matched sensitive data snippet isn’t masked and entirely visible when stored in the DLP cloud service.
- partial-mask—Matched sensitive data snippet is partially masked displaying four characters when stored in the DLP cloud service.
- full-mask—Matched sensitive data snippet is fully masked when stored in the DLP cloud service.
- ClickOKto save your configuration changes.
- Commit and push the new configuration to your managed firewalls to complete theEnterprise DLPplugin installation.This step is required forEnterprise DLPdata filtering profile names to appear in Data Filtering logs.TheCommit and Pushcommand isn’t recommended forEnterprise DLPconfiguration changes. Using theCommit and Pushcommand requires the additional and unnecessary overheard of manually selecting the impacted templates and managed firewalls in the Push Scope Selection.
- Full configuration push from Panorama
- SelectandCommitCommit toPanoramaCommit.
- SelectandCommitPush to DevicesEdit Selections.
- SelectDevice GroupsandInclude Device and Network Templates.
- ClickOK.
- Pushyour configuration changes to your managed firewalls that are usingEnterprise DLP.
- Partial configuration push from PanoramaYou must always include the temporary__dlpadministrator when performing a partial configuration push. This is required to keepPanoramaand the DLP cloud service in sync.For example, you have anadminPanoramaadmin user who is allowed to commit and push configuration changes. Theadminuser made changes to theEnterprise DLPconfiguration and only wants to commit and push these changes to managed firewalls. In this case, theadminuser is required to also select the__dlpuser in the partial commit and push operations.
- Select.CommitCommit toPanorama
- SelectCommit Changes Made Byand then click the current Panorama admin user to select additional admins to include in the partial commit.In this example, theadminuser is currently logged in and performing the commit operation. Theadminuser must clickadminand then select the__dlpuser. If there are additional configuration changes made by other Panorama admins they can be selected here as well.ClickOKto continue.
- Commit.
- Select.CommitPush to Devices
- SelectPush Changes Made Byand then click the current Panorama admin user to select additional admins to include in the partial push.In this example, theadminuser is currently logged in and performing the push operation. Theadminuser must clickadminand then select the__dlpuser. If there are additional configuration changes made by other Panorama admins they can be selected here as well.ClickOKto continue.
- SelectDevice GroupsandInclude Device and Network Templates.
- ClickOK.
- Pushyour configuration changes to your managed firewalls that are usingEnterprise DLP.