Focus

ION 5200 Hardware Reference

ION 5200 LEDs

Table of Contents

Lets see and learn more about the ION 5200 LEDs in Hardware reference guide.

Refer to the ION 5200 device front panel images for position of the LEDs on the ION 5200 devices and its description.

LEDs	ION 5200
Service	Blue LED indicates the device is in Service mode. Off LED indicates that the device is not in Service mode.
Power	Green LED indicates the device is powered on. Red LED indicates that the device is not getting enough power. Off LED indicates that the device is powered off.
Operating System Status	Green LED indicates OS is running. Red LED indicates secure boot has failed.
Controller	Green LED indicates that the device is connected to the controller. Red LED indicates the device is attempting to connect to the controller. Off LED indicates that the device is not attempting to connect to the controller.
HA	Green LED indicates that the device is Active. Yellow LED indicates the device is on standby mode. Off LED indicates that the device is not HA configured.
Temperature	Green—Link detected and speed is 100Mbps. Red—Link detected and speed is 1Gbps.
PSU 1	Off—LED indicates that the PSU is not present. Green—LED indicates that the PSU is active and good. Red—LED indicates that the PSU is not active.
PSU 2	Off—LED indicates that the PSU is not present. Green—LED indicates that the PSU is active and good. Red—LED indicates that the PSU is not active.
FAN	Green—LED indicates that the FAN is running good. Red—LED indicates that the FAN service is required.
Link/Speed/Activity (PHY controlled)	10G SFP+Ports Speed and Activity LED- Yellow (1Gbps) or Green (10Gbps). 1G/MGiG RJ45 Ports Activity LED- Green ON/blinking.

Installation Kit Components

ION 5200 Compliance Statement

© 2025 Palo Alto Networks, Inc. All rights reserved.