: Add a Subnet with Only Static IP Addresses
Focus
Focus

Add a Subnet with Only Static IP Addresses

Table of Contents

Add a Subnet with Only Static IP Addresses

Assist
IoT Security
in discovering static IP devices by manually adding a subnet that contains static IP devices.
Instead of uploading a CSV file with a list of static IP subnets (see Upload a List of Subnets with Only Static IP Addresses), you can add them individually.
  1. Navigate to the Networks page (
    Networks
    Networks and Sites
    Networks
    ) and then click
    Add
    Add a Subnet
    .
  2. Define a subnet and then
    Save
    .
    Type
    : Select
    Subnet
    .
    Prefix
    : Enter the IP address/netmask of the subnet you want to add. Enter the IP address of the subnet in dot-decimal notation and its netmask in CIDR notation (example, 10.1.1.0/24).
    Name
    (optional): Enter a name for the subnet
    VLAN ID
    (optional): Enter the VLAN ID for the subnet.
    Description
    (optional): Enter a description of the VLAN/subnet, such as the type of devices for which it’s intended. These special characters are not allowed in the description field: ~ ` ! # $ % ^ & * + = { } [ ] | \ < > ?
    Mark this subnet as static
    : Select.
    It can take several minutes for new entries to appear on the Networks page. You might have to reload the page to see the updated data.

Recommended For You