: Set up AIMS for Integration
Focus
Focus

Set up AIMS for Integration

Table of Contents

Set up AIMS for Integration

Set up AIMS for integration with
IoT Security
through
Cortex XSOAR
.
Set up an AIMS API configuration to define the maximum number of device records that AIMS will provide to
IoT Security
and record the client ID that AIMS generates. You will use the client ID when configuring the AIMS integration instance in <ph keyref="xsoar"/>.
These instructions are based on AIMS version 2.6.11.
IoT Security
supports all AIMS v2 builds but not AIMS v3.
  1. Log in to the AIMS system and click
    Transfer
    API Configuration
    .
    The API Configuration dialog box appears.
  2. Configure the AIMS API settings.
    Enter the following and then click
    Add
    :
    Name
    : Enter a name for your API configuration.
    Type
    :
    API
    Record Limit
    : Set the maximum number of device records that AIMS will provide to
    IoT Security
    , keeping in mind that there is one record per device. In the following screen capture, the maximum is 5000 records. If there are more than 5000 records in the AIMS inventory that you want to import, increase the maximum to accommodate them. You can increase this as high as 100,000.
  3. Record the client ID for use when configuring the AIMS integration instance in
    Cortex XSOAR
    and then click
    Close
    .

Recommended For You