: Set up IoT Security and XSOAR for Cisco Prime Integration
Focus
Focus

Set up IoT Security and XSOAR for Cisco Prime Integration

Table of Contents

Set up
IoT Security
and XSOAR for Cisco Prime Integration

Set up
IoT Security
and
Cortex XSOAR
to integrate with Cisco Prime Infrastructure.
To set up
IoT Security
to integrate through
Cortex XSOAR
with Cisco Prime Infrastructure, you must add a
Cortex XSOAR
engine to your network.
You must also configure the Cisco Prime integration instance in XSOAR. To do this, you need the IP address of your Cisco Prime system and the username and password of the NBI read-only user account that the XSOAR engine will use when forming a secure connection with Prime.

Cortex XSOAR
Engine Installation

The
Cortex XSOAR
engine initiates connections to Cisco Prime Infrastructure and to the Cortex cloud and provides the means through which they communicate with each other. Although it's possible to install an XSOAR engine on machines running Windows, macOS, and Linux operating systems, only an engine on a Linux machine supports
IoT Security
integrations. For more information about operating system and hardware requirements, see the
Cortex XSOAR
.
We recommend downloading the XSOAR engine using the shell installer script and installing it on a Linux machine. This simplifies the deployment by automatically installing all required dependencies and also enables remote engine upgrades.
When placing the XSOAR engine on your network, make sure it can form HTTPS connections to your Cisco Prime system on TCP port 443. The XSOAR engine uses TCP 443 when authenticating with Cisco Prime and requesting and receiving device data.
The on-premises firewall must allow the XSOAR engine to form HTTPS connections on TCP port 443 to the Cortex cloud at https://<your-domain>.iot.demisto.live/. You can see the URL of your XSOAR instance when you log in to the
IoT Security
portal and click
Integrations
Launch
Cortex XSOAR
. It’s visible in the address bar of the web page displaying the XSOAR interface.
To create an XSOAR engine, access the
Cortex XSOAR
interface (from the
IoT Security
portal, click
Integrations
Launch
Cortex XSOAR
). Click
Settings
Engines
Create New Engine
. Choose
Shell
as the type.
For installation instructions, see Install .
For help troubleshooting
Cortex XSOAR
engines, including installations, upgrades, connectivity, and permissions, see Troubleshoot and Troubleshoot Integrations Running on Engines.

Configure
IoT Security
and
Cortex XSOAR

  1. Log in to
    IoT Security
    and from there access Cisco Prime settings in
    Cortex XSOAR
    .
    1. Log in to
      IoT Security
      and then click
      Integrations
      .
    2. IoT Security
      uses
      Cortex XSOAR
      to integrate with Cisco Prime, and the settings you must configure to integrate with Prime are in the XSOAR interface. To access these settings, click
      Launch
      Cortex XSOAR
      .
      The
      Cortex XSOAR
      interface opens in a new browser window.
    3. Click
      Settings
      in the left navigation menu, search for
      cisco prime
      to locate it among other instances.
  2. Configure the Cisco Prime instance.
    1. Click
      Add instance
      to open the settings panel.
    2. Enter the following and leave other settings at their default values:
      Name
      : Use the default name of the instance (Cisco Prime_instance_1) or enter a new one.
      Remember the instance name because you are going to use it again when creating jobs that
      Cortex XSOAR
      will run.
      Cisco Prime Server URL
      : Enter the Cisco Prime Server URL.
      Cisco Prime username
      : Enter the name of the NBI read-only user account you previously created in Cisco Prime.
      Password
      : Enter the password associated with the user account.
      Run on Single engine
      : Choose the XSOAR engine that you want to communicate with the Cisco Prime system.
    3. When finished, click
      Run test
      or
      Test
      .
      If the test is successful, a Success message appears. If not, check that the settings were entered correctly and then test the configuration again.
    4. After the test succeeds, click
      Save & exit
      to save your changes and close the settings panel.
  3. To enable Cisco Prime Integration Instance, click
    Enable
    .
  4. Create a job for XSOAR to get a list of MAC addresses of active devices from
    IoT Security
    and then query Cisco Prime for details about the devices in the list.
    IoT Security
    and XSOAR only request details from Prime if a device has a MAC address. If your network has static IP devices without MAC addresses, they will not be included.
    Copy the name of the instance you just created, navigate to Jobs, and then click New Job at the top of the page.
    In the New Job panel that appears, enter the following and leave the other settings at their default values:
    Recurring
    : Select this because you want to periodically poll Cisco Prime for device details.
    Every
    : Enter a number and set the interval value (Minutes, Hours, Days, or Weeks) and select the days on which to run the job. This determines how often XSOAR sends a list of MAC addresses of currently active devices from
    IoT Security
    to Cisco Prime and receives device details in response.
    As a general rule of thumb, this job takes about 15 minutes per 1000 devices to complete. Other factors that might affect the time required to complete a job are the Cisco DNA Center API processing speed and settings.
    Name
    : Enter a name for the job.
    Playbook
    : Choose
    Cisco Prime Clients
    .
    Integration Instance Name
    : Paste the instance name you copied a few moments ago.
    Playbook Poll Interval
    : Enter a number (the value, though unspecified, is minutes) defining the period of time during which
    IoT Security
    must see device activity to include it in the list of currently active devices it provides to XSOAR. It’s common to use the same interval as the one above for running the recurring job.
    Site Names
    : By default, the XSOAR retrieves device data from all sites that
    IoT Security
    manages. If there are multiple sites and you want to get device data from a subset of them or Cisco Prime is managing a subset of them, specify them by name here. Separate multiple names with commas. Use quotation marks around names with spaces. Because the
    Cortex XSOAR
    UI opens in a new browser window, you can return to the previous window with the
    IoT Security
    portal and navigate to
    Administration
    Sites and Firewalls
    Sites
    to view a list of site names.
    Click
    Create new job
    .
    The job appears at the bottom of the Jobs list.
  5. Enable the job and run it.
    Check the Job Status for the job you created. If it’s Disabled, select its check box and then click
    Enable
    .
    After you enable it, keep the check box selected and click
    Run now
    . The Run Status changes from Idle to Running. In addition, running a job in XSOAR triggers the referenced integration instance to appear on the Integrations page in the
    IoT Security
    portal.
    At the defined interval, XSOAR begins the job by first requesting an active device list from
    IoT Security
    and then using that list to query Cisco Prime for client details, which it forwards to the
    IoT Security
    cloud.
  6. If you have multiple Prime instances, add more jobs as necessary.
    To add another, click
    Add instance
    , configure the settings as previously explained, and then click Done.
    You can configure multiple instances with different XSOAR engines retrieving device information from the same Cisco Prime server. However, a single engine cannot retrieve information from multiple servers.
    Run each job you create at least once to populate the Integrations page with all the integration instances you’re using in XSOAR.
  7. Return to the
    IoT Security
    portal and check the status of the Cisco Prime integration.
    An integration instance can be in one of the following four states, which
    IoT Security
    displays in the Status column on the Integrations page:
    • Disabled
      means that either the integration was configured but intentionally disabled or it was never configured and a job that references it is enabled and running.
    • Error
      means that the integration was configured and enabled but is not functioning properly, possibly due to a configuration error or network condition.
    • Inactive
      means that the integration was configured and enabled but no job has run for at least the past 60 minutes.
    • Active
      means that the integration was configured and enabled and is functioning properly.
    When you see that the status of an integration instance is
    Active
    , its setup is complete. At the defined interval, XSOAR begins the job by first requesting an active device list from
    IoT Security
    and then using that list to query Cisco Prime for client details, which it forwards to the
    IoT Security
    cloud.

Recommended For You