Enable Device Telemetry
Focus
Focus

Enable Device Telemetry

Table of Contents
End-of-Life (EoL)

Enable Device Telemetry

You can configure the telemetry data that PAN-OS collects and shares with Palo Alto Networks
By default, your device does not share data with Palo Alto Networks. If sharing is enabled, you can stop sharing all device telemetry by:
Device
Setup
Telemetry
, uncheck the
Enable Telemetry
box, and then commit your change.
To enable Device Telemetry so that data is shared with Palo Alto Networks:
  1. Enable Cortex Data Lake.
    1. If your organization does not have a Cortex Data Lake license, install a device certificate if one is not already installed on your device.
      If your organization does have a Cortex Data Lake license, make sure it is activated.
    2. Make sure that your network is properly configured so that the firewall can send data to Cortex Data Lake.
  2. Navigate to
    Device
    Setup
    Telemetry
  3. Edit the
    Telemetry
    widget.
  4. In
    Telemetry Destination
    , select your region. If your organization is using Cortex Data Lake, you must use the region that your Cortex Data Lake is configured to use.
  5. Click
    OK
    , and then commit your changes.

Recommended For You