Change the Key Lifetime or Authentication Interval for IKEv2
Focus
Focus

Change the Key Lifetime or Authentication Interval for IKEv2

Table of Contents
End-of-Life (EoL)

Change the Key Lifetime or Authentication Interval for IKEv2

This task is optional; the default setting of the IKEv2 IKE SA re-key lifetime is 8 hours. The default setting of the IKEv2 Authentication Multiple is 0, meaning the re-authentication feature is disabled. For more information, see SA Key Lifetime and Re-Authentication Interval.
To change the default values, perform the following task. A prerequisite is that an IKE crypto profile already exists.
  1. Change the SA key lifetime or authentication interval for an IKE Crypto profile.
    1. Select
      Network
      Network Profiles
      IKE Crypto
      and select the IKE Crypto profile that applies to the local gateway.
    2. For the
      Key Lifetime
      , select a unit (
      Seconds
      ,
      Minutes
      ,
      Hours
      , or
      Days
      ) and enter a value. The minimum is three minutes.
    3. For
      IKE Authentication Multiple
      , enter a value, which is multiplied by the lifetime to determine the re-authentication interval.
  2. Commit your changes.
    Click
    OK
    and
    Commit
    .

Recommended For You