Syslog Forwarding Using Ethernet Interfaces
Table of Contents
10.0 (EoL)
Expand all | Collapse all
-
- Automatic Content Updates Through Offline Panorama
- Enhanced Authentication for Dedicated Log Collectors and WildFire Appliances
- Syslog Forwarding Using Ethernet Interfaces
- Increased Configuration Size for Panorama
- Access Domain Enhancements for Multi-Tenancy
- Enhanced Performance for Panorama Query and Reporting
- Log Query Debugging
- Configurable Key Limits in Scheduled Reports
- Multiple Plugin Support for Panorama
End-of-Life (EoL)
Syslog Forwarding Using Ethernet Interfaces
Use Ethernet interfaces, rather than the management interface,
to forward syslogs.
PAN-OS 10.0 enables syslog forwarding over
an Ethernet interface to optimize management operations. In an environment with
a high rate of log generation, you can forward logs over an Ethernet
interface to prevent loss of logs and to reduce the load on the
management interface.
Syslog forwarding uses an Ethernet interface
that is supported only for a Panorama™ management server in Panorama
mode or in Log Collector mode. Additionally, you can enable syslog
forwarding on only a single interface regardless whether the Panorama
management server is in Panorama mode or Log Collector mode.
- Log in to the Panorama Web Interface.
- Configure a Managed Collector.
- Configure an Ethernet interface for forwarding syslogs
over an Ethernet interface.
- Configure an Ethernet interface on the local Log Collector.
- Select PanoramaSetupInterfaces and select an Ethernet interface.
- Enable Interface.
- Configure the Ethernet interface as appropriate.
- In the Device Management Services section, enable Syslog Forwarding.
- Select Yes to confirm your syslog forwarding change.You can only a single Ethernet interface on the local Log Collector.
- Click OK to save your changes.
- Commit and then Commit and Push your configuration changes.
- Configure an Ethernet interface on a Dedicated Log Collector.
- Select PanoramaManaged Collectors and select a Dedicated Log Collector.
- Enable Interface.
- Configure the Ethernet interface as appropriate.
- In the Log Collection Services section, enable Syslog Forwarding.
- Select Yes to confirm your syslog forwarding change.You can only a single Ethernet interface on the Dedicated Log Collector.
- Click OK to save your changes.
- Commit and then Commit and Push your configuration changes.
- Configure a Collector Group—On the M-Series appliance, a default Collector Group is predefined and already contains the local Log Collector as a member. However, on the Panorama virtual appliance, you must add the Collector Group and add the local Log Collector as a member. For both configurations, you need to assign firewalls to a Log Collector for log forwarding.
- Configure log forwarding to Panorama.
- Configure syslog forwarding from Panorama to a syslog server.