Baseline CPS Measurements for Setting Flood Thresholds
Focus
Focus
Next-Generation Firewall

Baseline CPS Measurements for Setting Flood Thresholds

Table of Contents

Baseline CPS Measurements for Setting Flood Thresholds

Taking baseline measurements of average and peak CPS for each zone helps define reasonable thresholds to prevent floods without unnecessarily throttling traffic.
Where Can I Use This?What Do I Need?
NGFW (Managed by PAN-OS or Panorama)
  • No prerequisites needed
Flood protection thresholds determine the number of new connections-per-second (CPS) to allow for a zone (Zone Protection profile), for a group of devices in a zone (aggregate DoS Protection policy), or for individual devices in a zone (classified DoS Protection policy), when to throttle new connections to begin mitigating a potential flood attack, and when to drop all new connections. The default Zone Protection profile and DoS Protection profile flood protection thresholds aren’t appropriate for most networks because each network is unique. You need to understand the aggregate normal and peak CPS for each zone to set effective Zone Protection profile thresholds, and for the individual critical systems you want to defend to set effective DoS Protection profile thresholds that don’t inadvertently set thresholds too high and allow flood attacks or set thresholds too low and throttle traffic.
Measure average and peak CPS traffic over the course of at least five business days or until you’re confident that the measurements reflect the network’s typical traffic patterns; the longer measurement period, the more accurate the measurements. Take into account special events, quarterly events, and annual events that may spike the number of CPS you need to support. You may need to adjust Zone Protection profiles and schedule adjusted DoS Protection policy rules to accommodate these types of events if your firewalls have the capacity to handle extra traffic. Take the following baseline measurements:
  • For Zone Protection profiles, measure the average and peak CPS ingressing each zone.
  • For aggregate DoS Protection profiles, measure the combined average and peak CPS for each group of devices you want to protect.
  • For classified DoS Protection profiles, measure the average and peak CPS of the individual devices you want to protect.
Also understand the capacity of your firewalls and how other resource-consuming features such as decryption affect the number of connections each firewall can control. As a general rule, the closer a firewall is to the perimeter, the greater its capacity needs to be because it handles more traffic. The datasheet for each firewall model includes the total new sessions per second (CPS) the firewall supports and the Firewall Comparison Tool enables you to compare the CPS (and other metrics) of different firewall models.