Prisma Access
View and Monitor Third-Party Device-IDs
Table of Contents
View and Monitor Third-Party Device-IDs
View insights for your third-party IoT devices.
| Where Can I Use This? | What Do I Need? |
|---|---|
|
|
You can use the Cloud Identity Engine with Prisma Access to apply information from
third-party IoT detection sources to simplify the task of identifying and closing
security gaps for devices in your network. See Configure Third-Party Device-ID in Prisma
Access for details about setup and configuration.
Go to to get insights on your IoT devices, such as the number of IoT devices
connected within the last 30 minutes, all IoT devices connected during the time range
selected, and details about all connected IoT devices.
Devices Currently Connected
View the number of devices connected, if any, in the past 30 minutes. Now
always shows the Devices Currently Connected only in the last 30 minutes.
Connected IoT Devices
Connected IoT Devices shows the number of connected devices filtered by
Time Range. Customize the data shown by selecting other
filter options from the Add Filters drop-down.
- Category—The category to which this device belongs.
- Mac Address—The MAC address of the device.
- Profile—The device profile.
- Vendor—The device vendor.
- Source IP—The device's IP address.
- Prisma Access Location—The device's Prisma Access location.
- Branch Site—The branch site the device is on.
Hover over a point in the chart to see the number of users at a specific time.
Knowing the user trends over a specific period of time can help you monitor usage
and investigate any unusual patterns.
IoT Devices
View the number of IoT devices connected during the selected Time
Range. Use the column drop-down to select or deselect the columns
that appear in the table.
- Mac Address—The MAC address of the device.
- Category—The category to which this device belongs.
- Profile—The device profile.
- Vendor—Device vendor.
- Source IP—IP address of the device.
- Model—Device model.
- OS Version—OS version.
- OS Family—The OS family to which the device belongs.
- Prisma Access Location—The Prisma Access location used.
- Branch Site—The branch site the device is on.
The following IOT Devices table shows a customized column selection. To show all
columns in the table, select all options in the drop-down.
