| SPT Switchover | Select to enable shortest path tree (SPT) switchover.
This indicates that once the first multicast packet is received
i.e. the source address is received by the receiver, the DR at the
receiver’s end and the RP choose the optimal path to relay information
from the source to the receiver. | Enabled |
| Enable BSM | Select to enable receiving and forwarding of
BSM on multicast enabled interfaces. BSM is a protocol by which
the device learns RPs dynamically.Available only for ION devices
running software versions 6.0.1 or later. | |
| DR Priority | Indicates the probability of a PIM interface
being elected as a Designated Router (DR). For Static RP, the DR
Priority advertised in a PIM Hello is 1. | 1 |
| PIM Hello Interval | Indicates the time interval between two PIM
Hello packets. | 30 s |
| PIM Hello Hold Time | Indicates the time interval for which a neighbor
should wait for a Hello message from a sender neighbor before pruning the
neighbor. | 105 s |
| PIM Join/Prune Interval | Indicates the time interval between two Join/Prune
messages sent to a neighbor. | 60 s |
| PIM Join/Hold Interval | Indicates the time interval for which a receiver
should wait for the next Join/Prune message from the neighbor before
pruning the neighbor. | 210 s |
| PIM Triggered Hello Delay | Indicates the value of the Hello timer for delay
between triggered Hello messages. Available only for ION devices running
software versions earlier than 6.0.1. | 4 s |
| PIM TTL Threshold | Packets with a lower TTL than the PIM TTL Threshold
are discarded. Available only for ION devices running software
versions earlier than 6.0.1. | 1 |
| PIM SPT Threshold | Indicates the cut-over time from Rendezvous
Point Tree (RPT) to SPT. Available only for ION devices running
software versions earlier than 6.0.1. | 100 s |
| IGMP Query Interval | Indicates the time interval between successive
IGMP queries. | 125 s |
| IGMP Query Response Interval | Indicates the maximum response time advertised
in the IGMP query. | 10 s |
| IGMP Last Member Query Count | Indicates the number of times the ION device
sent IGMP queries to the last known active host on the subnet. | 3 |
| IGMP Last Member Query Response Interval | Indicates the time interval for the ION device
to respond to the IGMP query from the last known active host on
the subnet. | 1 s |
| IGMP Querier Timeout | Indicates the timeout interval to wait before
becoming a Querier. Available only for ION devices running software
versions earlier than 6.0.1. | 380 s |
| IGMP Query Max Response Time | Indicates the maximum response time to the
IGMP query. Available only for ION devices running software
versions 6.0.1 or later. | 100 s |
| Multicast Site Profile | Displays the multicast site profile associated
with the branch site.(Optional) Click Edit in
Site Summary Configuration to change the associated
multicast site profile. | |
