>
    Strata Copilot
    arping interface
    Focus
    Download PDF
    Focus
    1. Home
    2. Prisma SD-WAN
    3. Use CLI Commands
    4. Debug Commands
    5. arping interface
    Download PDF
    Prisma SD-WAN

    arping interface

    Table of Contents

    arping interface

    Use the arping interface command to send the ARP requests, replies, or gratuitous and to ping an interface or source IP.

    Command

    arping interface= interface_name Hostname= host_name (args= " ")

    Options

    interfaceEnter the interface name or ID.
    hostnameEnter the host name or IP address.
    args= "-b"Continue broadcasting, don't go unicast.
    args= "-cnumber"Enter the number of packets to be sent.
    args="-wnumber"Enter a time in seconds for arping to wait for a reply.

    Command Notes

    RoleSuper, Read Only
    Related Commands—
    Introduced inRelease 4.4.1

    Example

    arping controller1 192.168.30.1 args="-c 3"
				ARPING 192.168.30.1 from 192.168.30.10 eth0
				Unicast reply from 192.168.30.1 [00:50:56:92:8B:1A] 0.888ms
				Unicast reply from 192.168.30.1 [00:50:56:92:8B:1A] 0.862ms
				Unicast reply from 192.168.30.1 [00:50:56:92:8B:1A] 0.830ms
				Sent 3 probes (1 broadcast(s))Received 3 response(s)

    © 2025 Palo Alto Networks, Inc. All rights reserved.