Bandwidth Detection
Table of Contents
Bandwidth Detection
Within the CloudBlade, the default behavior
for licensing provisioning is to use the Circuit bandwidth configured
for the site/device. This behavior can be modified as needed to
suit business requirements by clicking the
Bandwidth
Detection
sub-option.
The default setting is to not modify the license selection behavior.
To change this default behavior, click
Yes
to
apply changes.
For non-ECMP sites, you can optionally set a per-tunnel license.
This example limits the Prisma Access License to 10 Mbps.
If an organization is comfortable with a certain level of Interface
Bandwidth to Prisma Access Licensing (i.e. a 100 Mbps circuit and
50 Mbps circuit for licensing, this may also be adjusted. This number
is expressed as a percentage (default is 1.00, or 100%). To achieve
the 50 Mbps licensing, adjust the number to 0.50.
Additional options for Prisma Access Licensing are as follows:
- Only select Prisma Access licenses BELOW configured WAN Interface Bandwidth.
- Will select the closest license level BELOW the WAN interface.
- For example, a device configured with a 125 Mbps circuit will license to 150 Mbps, if this option is not selected.
- If this option is selected, then the license chosen for that circuit to Prisma Access will be 100 Mbps.
- Divide configured Prisma SD-WAN WAN bandwidth equally for multiple Prisma Access tunnels.
- If selected, the license chosen for that circuit to Prisma Access will be 100 Mbps. If this is checked, and multiple tunnels are created to different Region(s) on interfaces, bandwidth for license selection will be separated equally across tunnels. (Ex: 100 Mbps WAN, 2 tunnels - each get 50 Mbps license).
- If this is not checked, all tunnels will use full interface bandwidth for license selection (Default).
- Force all Prisma Access tunnels to statically use Prisma Access Tunnel License limit (above).
- If this is checked, all Bandwidth detection logic will be disabled, and the system will select based on Tunnel License Limit Above.
- If this is not checked, Bandwidth and licenses will be detected as Normal (Default).
