Access the Integration Run Logs
Integration run logs can be accessed
using one of three methods:
Through log files in the /tmp/applog directory.
Through Syslog export to a remote logging system.
Through the container execution command.
Integration Logs are not uploaded to the Prisma SD-WAN
controller and will not display in the Prisma SD-WAN Messages menu.
To access the
applog directory logs
, simply enter the
applog directory
that
was
Bind Mapped
to the container on launch (-v $PWD/applog:/tmp/applog).
The latest file will be named
output.log
under a directory
named
Prisma-Access-for-Networks-(managed-by-Panorama)_2.0.3/<hostname
of container>
.
To send logs from the Integration container through Syslog, edit
the config.yml file, and add and/or uncomment the following lines:
SYSLOG_PORT: 514
SYSLOG_FACILITY: local2
On the next Integration run, the container will also send a copy
of the Integration Run logs to the specified Syslog server.
You can also execute a command in the container to follow the
log from the container command line. To do this using Docker, execute
the command:
docker exec -it <container name here> ./tail_applog.sh
If the container name is “prisma_access_panorama”, the
syntax would be as follows: docker exec -it prisma_access_panorama
./tail_applog.sh