Use Groups in Network Policy Rules
Table of Contents
Use Groups in Network Policy Rules
316 PIC
Before you can use a Standard VPN in a policy
rule, you need to have defined service endpoint groups. Each group
can have one or more Prisma SD-WAN data centers or standard service
endpoints. A group will be used in policy rules. The domain defining
the mappings for endpoints to groups must be assigned to a site
for the policy rules using the group to be effective. For more information,
refer to Managing Services and Data Center Groups. There can be
four combinations of Active/Backup groups that can be used in Policies.
You may select just one Prisma SD-WAN group or one non-Prisma SD-WAN
group as an active or backup path in policies. For example:
| Active Group | Backup Group | Example |
|---|---|---|
| Standard | Prisma SD-WAN | Internet-bound SSL traffic from a branch site will transit through the Cloud Security Service. In the event all standard VPN paths to any of the endpoints in the Primary Cloud Security Service group are not available, internet-bound SSL traffic will transit through one of the Prisma SD-WAN data center endpoints assigned to that group via the Prisma SD-WAN VPN. |
| Prisma SD-WAN | Standard | Internet-bound SSL traffic from a branch site will transit through one of the Prisma SD-WAN data center endpoints assigned to that group via the Prisma SD-WAN VPNs. In the event all Prisma SD-WAN VPNs to all of the Data Center endpoints in that group are unavailable, internet-bound SSL traffic will transit through the Cloud Security Service via one of the standard VPN paths to any of the endpoints in the standard group. |
| Standard | Standard | Internet-bound SSL traffic from a branch site will transit through the primary cloud security service via one of the standard VPN paths to any of the endpoints in the primary cloud security service group. In the event all standard VPNs are down to all endpoints in the primary group, the Internet bound SSL traffic will transit through the backup cloud security service via one of the standard VPN paths to the endpoints that are part of the backup group. |
| Prisma SD-WAN | Prisma SD-WAN | Internet-bound SSL traffic from a branch site will transit through one of the Prisma SD-WAN data center endpoints assigned to the active group via the Prisma SD-WAN VPNs. In the event all Prisma SD-WAN VPNs to all of those endpoints are down, internet-bound SSL traffic will transit through one of the Prisma SD-WAN data center endpoints assigned to the backup group via the Prisma SD-WAN VPNs. |
- From the Prisma SD-WAN web interface, navigate to .
- Select .
- Select a Path Policy Set and an appropriate Path Policy
rule. On the Paths tab, select Standard VPN as either an Active or Backup path.
![]()
You can mix Standard VPN with other available paths - private, public, direct or VPNs. - Navigate to Service & DC Groups.
Choose a group from either the Active or Backup drop-down lists.If standard VPN is used in a network policy, then you must have a standard Services and DC Group defined in the policy for the traffic to transit through that group. If not, traffic will be black-holed. If required is selected, traffic will always transit through the Services and DC Group. If not selected, traffic may or may not transit through the Services and DC Group per policy.
- Save & Exit to save the policy rule.
