System Disk Size Increase on ESXi
Focus
Focus
VM-Series

System Disk Size Increase on ESXi

Table of Contents

System Disk Size Increase on ESXi

Migrate the VM-Series deployed from an image with a 60GB system disk to a new 60GB or 80GB system disk (with new disk partitioning) on ESXi.
Where Can I Use This?What Do I Need?
  • VM-Series 10.2.15
  • PAN-OS 11.1 or later
  • 60 GB or 80GB disk (If you use /opt/panlogs for local logging, create an 80GB disk so that the partition has enough space.) Ensure the new disk includes the identical guest-os-features as the primary drive.
  • VMware ESXi access with permission to edit virtual machine settings
  • Datastore with 60 GB of free space (80 GB if the firewall stores logs locally in panlogs)
VM-Series software firewalls deployed from older base images such as 10.2.x keep the original, smaller /dev/root partitions, even after you upgrade PAN-OS to 11.1.x or 11.2.x. Cloning the system disk to a 60 GB or 80GB disk increases the root partition across both sysroots from 6.9G to 12G.
The firewall has to reboot twice during this procedure, so plan a maintenance window. Your software version and configuration don't change.
  1. Check the current disk layout and software version.
    admin> show system disk-space admin> show system info | match sw
    The older layout shows /dev/root at about 6.9G.
  2. Shutdown the firewall.
    admin> request shutdown system
    If the VM does not power off, right-click the VM and select PowerPower Off.
  3. Add a new virtual disk to the VM.
    1. Right-click the VM and select Edit Settings.
    2. Click Add New Device and choose Hard Disk.
    3. For a New Hard Disk, enter 60 GB. Enter 80 GB if the firewall stores logs locally.
    4. For Disk Provisioning, choose the same type as the original system disk.
    5. For Virtual Device Node, choose an unused node on the same SCSI controller, such as SCSI(0:1).
    6. Click OK.
  4. Power on the VM.
    1. Right-click the VM and select PowerPower On.
    2. Open the VM console.
  5. Clone the system disk to the new disk.
    1. Log in to the firewall CLI.
    2. List the available target disks.
      admin> request system clone-system-disk target ?
    3. Start the migration and enter Y when prompted.
    4. Monitor the console. The cloning procedure requires approximately 20 to 30 minutes. Verify the drive transfer is fully finished prior to proceeding.
  6. Shut down the VM.
    1. Right-click the VM and select PowerShut Down Guest.
  7. Swap the system disks.
    1. Right-click the VM and select Edit Settings.
    2. Identify the original system disk (SCSI(0:0)) and the new disk.
    3. Click the remove icon for the original disk. Do not enable Delete files from datastore. You need the disk if you must roll back.
    4. For the new disk, set Virtual Device Node to SCSI(0:0).
    5. Click OK.
  8. Power on the VM.
    1. Right-click the VM and select PowerPower On.
  9. Verify the new partition layout.
    1. Log in to the firewall CLI.
    2. Check the partition sizes.
      admin> show system disk-space
      The output shows /dev/root at about 12G.
  10. Confirm the software version has not changed.
    admin> show system info | match sw
  11. (Optional) Delete the original disk file from the datastore after you confirm the firewall operates normally.