Prisma SD-WAN OSPF
Prisma SD-WAN now supports OSPF is an interior gateway protocol (IGP) often used to
manage network routes dynamically in large enterprise networks.
Prisma SD-WAN supports using Open Shortest Path First (
OSPF available in software version 6.4 and
later) to manage network routes dynamically. OSPF is an interior gateway protocol (IGP)
that simplifies routing for large enterprise networks at Branch sites, the Aggregation
Layer on campus, and Data Center sites. The protocol determines routes dynamically by
obtaining information from other routers and advertising them through Link State
Advertisements (LSAs). Routers use the information collected from the LSAs to create and
share a network topology map across the network, which populates the IP routing table.
OSPF simplifies network management and helps ensure high availability by dynamically
adjusting routes to network changes.
To configure OSPF, you must enable L3 Direct Private WAN Forwarding, which allows your
ION device to pair with an OSPF router via a private WAN interface. You must enable both
L3 Direct Private WAN Forwarding and L3 LAN Forwarding to use dynamic LAN routing.