>
    Configure a Per-App VPN Configuration for iOS Endpoints Using MobileIron
    Focus
    Download PDF
    Focus
    1. Home
    2. GlobalProtect
    3. Mobile Device Management
    4. Manage the GlobalProtect App Using MobileIron
    5. Configure MobileIron for iOS Endpoints
    6. Configure a Per-App VPN Configuration for iOS Endpoints Using MobileIron
    Download PDF
    GlobalProtect

    Configure a Per-App VPN Configuration for iOS Endpoints Using MobileIron

    Table of Contents
    End-of-Life (EoL)

    Configure a Per-App VPN Configuration for iOS Endpoints Using MobileIron

    You can enable access to internal resources from your managed mobile endpoints by configuring GlobalProtect VPN access using MobileIron. In a per-app VPN configuration, you can specify which managed apps can route traffic through the VPN tunnel. Unmanaged apps will continue to connect directly to the internet instead of through the VPN tunnel.
    Use the following steps to configure a per-app VPN configuration for iOS endpoints using MobileIron:
    1. Download the GlobalProtect app for iOS.
    2. Add a certificate configuration and then configure the certificate settings.
      All per-app VPN configurations require certificate-based authentication.
    3. Add a per-app VPN configuration.
      • Set the configuration type to Per-app VPN.
    4. Configure per-app VPN settings for iOS.
      • Set the Connection Type to Palo Alto Networks GlobalProtect, and then configure the associated settings.

    © 2024 Palo Alto Networks, Inc. All rights reserved.