Focus

ION 5200 Hardware Reference

Power on the ION

Table of Contents

Power on the ION

Lets learn on the Power on the ION 5200.

Connect the power cables to the ION device and plug the device power cable into an AC power outlet. When you switch on the power, the device powers on and the power indicator turns green.

Restart the ION 5200

Press the power switch three times (press and hold for one second, and then release) to restart the device.

Shut Down the ION 5200

Shut down the ION 5200 in the following ways:

Shut down using the Device Toolkit commands
Run the device toolkit command debug shutdown to shut down the device.

Ensure the device is physically accessible to turn it back on, before executing the command.
Shut down using the Power Switch
Press the power switch for more than five to eight seconds and then release to shut down the ION 5200 device.

When you shut down the device using the device CLI toolkit command or the power switch, click the power switch once to power on the device.

ION 5200 Compliance Statement

Install the ION 5200