IP Address: Enter the static IP address of the device you want to add to your inventory. The IP address is what Device Security uses to track user-defined static IP devices.

MAC Address (optional): If you want, add the MAC address of the device in hexadecimal notation. Device Security accepts any of the following MAC address formats:

Vendor (optional): Enter the vendor for this device.

Model (optional): Enter the device model.

The vendor and model attributes provide extra information when referring to entries on the User-Defined Static IP Devices page later. However, they do not appear on the Devices and Device Details pages.

After you add the static IP device, Device Security initially treats it as “not found”. It incrementally increases the Total User-Defined Static IP Devices counter by one and the Devices Not Found counter by one. Although it adds an entry for it to the User-Defined Static IP Devices list, the Result column remains empty – there isn’t a “matched” entry, indicating that Device Security detected network activity for this IP address, or a dash, indicating that no such activity was detected.

Because Device Security periodically compares entries in the user-defined static IP devices list with those in its inventory and its internal database of detected IP addresses without accompanying MAC addresses, the page can remain in this initial state for several minutes.

If a match is found, the Device Matches counter increases by one and the Devices Not Found counter decreases by one. Also, “matched” now appears in the Result column.

If Device Security does not find a match, it eventually displays a dash in the Result column.

IP Address: Enter the static IP address of the device you want to add to your inventory. The IP address is what Device Security uses to track user-defined static IP devices.

MAC Address (optional): If you want, add the MAC address of the device in hexadecimal notation. Device Security accepts any of the following MAC address formats:

Vendor (optional): Enter the vendor for this device.

Model (optional): Enter the device model.

The vendor and model attributes provide extra information when referring to entries on the User-Defined Static IP Devices page later. However, they do not appear on the Devices and Device Details pages.

After you add the static IP device, Device Security initially treats it as “not found”. It incrementally increases the Total User-Defined Static IP Devices counter by one and the Devices Not Found counter by one. Although it adds an entry for it to the User-Defined Static IP Devices list, the Result column remains empty – there isn’t a “matched” entry, indicating that Device Security detected network activity for this IP address, or a dash, indicating that no such activity was detected.

Because Device Security periodically compares entries in the user-defined static IP devices list with those in its inventory and its internal database of detected IP addresses without accompanying MAC addresses, the page can remain in this initial state for several minutes.

If a match is found, the Device Matches counter increases by one and the Devices Not Found counter decreases by one. Also, “matched” now appears in the Result column.

If Device Security does not find a match, it eventually displays a dash in the Result column.