View policy rule sets and ACL rule sets generated from
Device Security recommendations.
Where Can I Use This?
What Do I Need?
Device Security (Managed by Strata Cloud Manager)
(Legacy) IoT Security (Standalone portal)
One of the following subscriptions:
Device Security subscription for an advanced
Device Security product (Enterprise,
OT, or Medical)
Device Security X subscription
From PAN-OS 11.1, there's a different process for recommending
Security policy rules to next-generation firewalls from that described here. The
following workflow remains applicable to firewalls running PAN-OS versions prior to
PAN-OS 11.1.
To access the Policy page of a device profile, select Profiles
>profile_name> Policy.
This page lists all the policy sets that were created for the
device profile, when they were last updated, whether they were activated,
and if so, when. When there are no policy sets for a device profile,
the Policy page is empty.
If you create a policy set for a device profile and save it without
activating it, it’s added to the Policy page. In this case, there’s
a dash in the Last Set as Active column.
After you activate a policy set, it’s marked with an Active label
and Device Security adds a timestamp in the Last Set as Active column.
If you later deactivate the policy set, the Active label is removed.
However, the timestamp in the Last Set as Active column remains
indicating that it once was active and when.
New behaviors are behaviors discovered on the network after the active policy set was activated
or last updated. Unexpected behaviors are behaviors that were explicitly not permitted
when the policy set was activated or last updated but have since appeared on the
network, which means the enforcement implemented in a next-generation firewall is
missing them. If Device Security detects new or unexpected behaviors on the network
after some time has passed since the policy set was first activated, it lists them on
the AssetsProfiles > profile_name > Policy page and presents
you with an opportunity to modify the active policy set to account for these
behaviors.
When integrating Device Security with Cisco ISE, you can send ISE
automatically generated ACL rule sets for IoT devices. For information
about providing ISE with access control lists for IoT devices, see Apply Access Control Lists through
Cisco ISE.