Focus

IoT Security Integration Guide

Set up IoT Security and XSOAR for AIMS Integration

Table of Contents

Set up IoT Security and XSOAR for AIMS Integration

Set up IoT Security and Cortex XSOAR to integrate with AIMS.

To set up IoT Security to integrate through Cortex XSOAR with an on-premises AIMS system, you must install an XSOAR engine to your network.

You must also configure the AIMS integration instance in XSOAR and two jobs that pull data from AIMS through XSOAR to IoT Security:

A facility job that periodically pulls employee and priority information
A job that imports device data

To do this, you need the URL of your AIMS system, the port number on which it listens for connection requests, and the username and password of the AIMS user account that the XSOAR engine will use when forming a secure connection with Rapid7.

Cortex XSOAR Engine Installation

When the AIMS system is on premises, you must install an XSOAR engine to facilitate communications between the AIMS system and Cortex XSOAR cloud. Although it's possible to install an XSOAR engine on machines running Windows, macOS, and Linux operating systems, only an engine on a Linux machine supports IoT Security integrations. For more information about operating system and hardware requirements, see the Cortex Administrator’s Guide.

We recommend downloading the XSOAR engine using the shell installer script and installing it on a Linux machine. This simplifies the deployment by automatically installing all required dependencies and also enables remote engine upgrades.

When placing the XSOAR engine on your network, make sure it can form connections to your AIMS system on the TCP port on which it’s listening for connection requests. The default port number is TCP 443.

The firewall must also allow the engine to form HTTPS connections on TCP port 443 to the Cortex cloud at https://<your-domain>.iot.demisto.live/. You can see the URL of your XSOAR instance when you log in to the IoT Security portal and click IntegrationsLaunch Cortex XSOAR. It’s visible in the address bar of the web page displaying the XSOAR interface.

To create an XSOAR engine, access the Cortex XSOAR interface (from the IoT Security portal, click IntegrationsLaunch Cortex XSOAR). Click SettingsEngines+ Create New Engine. Choose Shell as the type.

For installation instructions, see Install .

For help troubleshooting Cortex XSOAR engines, including installations, upgrades, connectivity, and permissions, see Troubleshoot and Troubleshoot Integrations Running on Engines.

Configure IoT Security and Cortex XSOAR

Log in to IoT Security and then access AIMS settings in Cortex XSOAR.
1. Log in to IoT Security and then click Integrations.
2. IoT Security uses Cortex XSOAR to integrate with AIMS, and the settings you must configure to integrate with it are in the XSOAR interface. To access these settings, click Launch Cortex XSOAR.
  The Cortex XSOAR interface opens in a new browser window.
3. Click Settings in the left navigation menu, search for aims to locate it among other instances.
Configure an AIMS integration instance.
1. Click Add instance to open the settings panel.
2. Enter the following and leave other settings at their default values:
  Name: Use the default name of the instance (AIMS_instance_1) or enter a new one.
  
  Remember the instance name because you are going to use it again when creating jobs that Cortex XSOAR will run.
  
  AIMS Server (IP or hostname): Enter IP address or domain name of the AIMS server followed by the port number on which it listens for connection requests. By default, it listens on TCP port 443. For example: 10.1.1.150:443
  Auth Token: Enter the client ID that you recorded earlier when setting up AIMS.
  Trust any certificate (not secure): (select)
  Use single engine: For cloud-based AIMS systems, choose No engine. For on-premises AIMS systems, choose the XSOAR engine that you previously installed.
3. When finished, click Run test or Test.
  If the test is successful, a Success message appears. If not, check that the settings were entered correctly and then test the configuration again.
4. After the test succeeds, click Save & exit to save your changes and close the settings panel.
To enable the AIMS integration instance, click Enable.
Create a job that retrieves device data from AIMS through XSOAR to IoT Security.
This job regularly imports device data from AIMS through Cortex XSOAR to IoT Security.
1. Click Jobs near the bottom of the left navigation menu to open the Jobs page.
2. Click New Job at the top of the Jobs page.
3. Enter the following, leave the other fields at their default values:
  Name: Type a name for the job such as AIMS device retrieval.
  Time triggered: (select)
  Recurring: (select)
  - Every: Enter the number of hours, minutes, days, or weeks to check AIMS for device data. Typically, shorter intervals provide more timely updates for active networks. However, for large networks, more frequent updates might exacerbate an already heavy traffic load. Weigh the two factors of activity and size when deciding and remember that you can always edit the playbook later to adjust this setting.
  - On: Select the days of the week that this job will run, or leave them unselected to run everyday.
  Playbook: Export AIMS maps and devices to PANW IoT
  Integration Instance Name: Enter the name of the AIMS integration instance you defined earlier. For example:
4. When complete, Create new job.
Create a job that periodically retrieves work order assignee and priority lists from AIMS.
This retrieves a list of employees and work order priority levels that populate fields in the Send Work Order dialog box in the IoT Security portal. This allows the IoT Security user to select this information when generating AIMS work orders to investigate security incidents.
1. On the Jobs list, click New Job at the top of the Jobs page.
2. Enter the following, leave the other fields at their default values:
  Name: Type a name for the job such as AIMS assignee and priority lists retrieval.
  Time triggered: (select)
  Recurring: (select)
  - Every: Enter the number of hours, minutes, days, or weeks to retrieve AIMS employee and work order priority lists.
  - On: Select the days of the week that this job will run, or leave them unselected to run everyday.
  Playbook: Export AIMS assignee and priority list to PANW IoT
  Integration Instance Name: Enter the name of the AIMS integration instance you defined earlier. For example: AIMS_instance_1
When complete, Create new job.

Run a job for each integration instance you create. The first time you run a job that references an integration instance triggers XSOAR to report the instance to IoT Security, which then displays the integration instance on the Integrations page.

Set up AIMS for Integration

Send Work Orders to AIMS