Objects > SD-WAN Link Management > SaaS Quality Profile
SD-WAN allows you to create Software-as-a-Service
(SaaS) quality profile to measure the path health quality between
your hub or branch firewall and a server-side SaaS applications
in order to accurately monitor SaaS application reliability and
swap paths should the path health quality degrade. This allows the
firewall to accurately determine when to failover to a different
Direct Internet Access (DIA) link.
The SaaS quality profile allows you to specify the SaaS application
to monitor using an adaptive learning algorithm that monitors the
application activity, or by specifying a SaaS application using
the application IP address, FQDN, or URL.
SaaS Quality Profile Settings
Name
Enter a name for the path quality profile
using alphanumeric characters, underscore, hyphen, space, and period.
Shared (Panorama only)
Check (enable) to make the SaaS Quality
profile shared across all device groups.
Disable Override (Panorama only)
Check (enable) to disable the ability to
override the SaaS Quality profile settings locally on the managed
firewall.
SaaS Monitoring Mode
Adaptive
The SaaS application session activity is
monitored for send and receive activity and the path health status
is derived automatically without any additional health checks on
the SD-WAN interface. This option is selected by default.
Static IP Address
IP Address/Object—Specify the SaaS
application to monitor using the application IP address.
IP
Address— The IP address of the SaaS application.
Probe Interval (Sec)—Specify, in seconds, the interval
the firewall probes the path quality health between the firewall
and the SaaS application. Default is 3 seconds.
Up
to 4 static IP addresses are supported.
FQDN—Specify the SaaS application
to monitor using the application Fully Qualified Domain Name (FQDN).
FQDN— The FQDN of the SaaS application. You must configure
a FQDN address object to specify
a FQDN.
The SaaS application FQDN must be resolvable in order
to successfully monitor the SaaS application.
Probe Interval (sec)—Specify, in seconds, the interval
the firewall probes the path quality health between the branch firewall
and the SaaS application. Default is 3 seconds.
HTTP/HTTPS
Specify the SaaS application to monitor
using the HTTP or HTTPS URL.
Monitored URL—The
HTTP or HTTPS URL of the SaaS application.
Probe Interval (sec)—Specify, in seconds, the interval
the firewall probes the path quality health between the firewall
and the SaaS application. Default is 3 seconds.