Configure IPv6 Multicast Routing

1. Select Network to access network-related settings.
2. Select Virtual Routers and select the desired Virtual Logical Router instance.

   This applies PIMv6 configuration within its designated domain.
3. Within the Logical Router settings, select the Multicast tab.

   This provides a centralized interface for PIMv6 and MLD settings.
4. Enable IPv6 Multicast.

   1. Select the PIM6 sub-tab.
   2. Select the Enable checkbox for PIM6.

      This activates the PIMv6 routing protocol on your virtual router.
5. Configure Multicast Listener Discovery (MLD) interfaces.

   1. Select the MLD sub-tab.
   2. Select Add to configure a new MLD interface.
   3. In the Interface field, select the IPv6 interface for MLD.
   4. In the Version dropdown, select MLDv1 or MLDv2.
   5. Configure other MLD parameters as required, such as Query Interval or Robustness Value.
   6. Select OK.
6. (PIM-SM only) Configure Rendezvous Points (RPs) in your PIM Sparse Mode environment.

   1. Select the PIM6 sub-tab.
   2. Select the RP sub-tab.
   3. Select Add to configure a new RP.
   4. Choose the RP Type, such as Static RP or Local RP.
   5. Enter the RP Address and define the Group List it serves.
   6. Select OK.
7. Define Static Multicast Routes.

   1. Select the Multicast tab within the Virtual Router settings.
   2. Select the Static Routes sub-tab.
   3. Select Add to create a new static multicast route.
   4. Enter the Source Address and Group Address.
   5. Select the Outgoing Interface.
   6. Select OK.
8. Commit the changes to apply the configuration.

   This saves and activates your new multicast routing capabilities.