To configure LLDP and create an LLDP profile,
you must be a superuser or device administrator (deviceadmin). A
firewall interface supports a maximum of five LLDP peers.
Enable LLDP on the firewall.
edit the LLDP General section; select
Change LLDP global settings.
Transmit Interval (sec)
specify the interval (in seconds) at which LLDPDUs are transmitted.
Range is 1 to 3600; default is 30.
Transmit Delay (sec)
the delay time (in seconds) between LLDP transmissions sent after
a change is made in a TLV element. The delay helps to prevent flooding
the segment with LLDPDUs if many network changes spike the number
of LLDP changes, or if the interface flaps. The
must be less than the
Range is 1 to 600; default is 2.
Hold Time Multiple
a value that is multiplied by the
determine the total TTL Hold Time. Range is 1 to 100; default is
4. The maximum TTL Hold Time is 65535 seconds, regardless of the