: Hardware Security Module Provider Configuration and Status
Focus
Focus

Hardware Security Module Provider Configuration and Status

Table of Contents

Hardware Security Module Provider Configuration and Status

The Hardware Security Module Provider section shows the HSM configuration settings and the connectivity status of the HSM.
Hardware Security Module Provider Status
Provider Configured
Select the HSM vendor configured on the firewall:
  • None
  • SafeNet Network HSM
  • nCipher nShield Connect
High Availability
(SafeNet Network only) HSM high availability is configured if checked.
High Availability Group Name
(SafeNet Network only) The group name configured on the firewall for HSM high availability.
Remote Filesystem Address
(nShield Connect only) The address of the remote filesystem.
Firewall Source Address
The address of the port used for the HSM service. By default this is the management port address. It can be specified as a different port however through the Services Route Configuration in DeviceSetupServices.
HSM Client Version on Firewall
Shows the HSM client version installed.
Master Key Secured by HSM
If checked, the master key is secured on the HSM.
Status
Shows green if the firewall is connected and authenticated to the HSM and shows red if the firewall is not authenticated or if network connectivity to the HSM is down.
You can also Hardware Security Module Status for more details on the HSM connection.